Read Sony DSLR-A560 / DSLR-A560L / DSLR-A560Y / DSLR-A580 / DSLR-A580J / DSLR-A580L / DSLR-A580Y Service Manual online
DSLR-A560/A560L/A560Y/A580/A580L/A580Y/A580J_L2
1-1
1. SERVICE NOTE
1-2. PRECAUTION ON REPLACING THE AM-025 BOARD
Destination Data
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
USB Serial No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
1-1. METHOD OF REPLACING THE FOCUS PLATE
1-3. METHOD FOR CHECKING THE AS SLIDER UNIT (863)
Make sure to confirm below before replacing the AS Slider B Assy or the AS Holder Actuator Assy.
(1) Remove the CV Rear Cover Assy (865), and temporally mount the AS Slider Unit (863).
(2) Set the AS Slider Unit (863) upwards as shown in figure, and put it on a stable place.
(3) Select “Slider Unit Check” of the adjustment software, and then confirm the movement to the directions of Pitch and Yaw, and if an error occurs,
replace it with the component part corresponding to the movement.
2
Remove the VM FS Retainer.
1
Remove two claws pushing part A below,
and remove the VM FS Retainer in the direction
of arrow.
3
Remove the Focus Plate and the VB Spacer.
Focus Plate
VB Spacer
VM FS Retainer
VM FS Retainer
Claw
Claw
Claw
A
Click on the first or last page to see other DSLR-A560 / DSLR-A560L / DSLR-A560Y / DSLR-A580 / DSLR-A580J / DSLR-A580L / DSLR-A580Y service manuals if exist.