Read Sony DSC-T77 (serv.man3) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony Coporation
Auto-ADJ
Ver. 1.2 2011.06
9-852-608-53
2011F05-1
© 2011.06
Published by Sony Techno Create Corporation
DSC-T77
DSC-T77_ADJ
Link
Link
List of service tools
Adjusting items when replacing main parts and boards
Before starting adjustments
VIDEO SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
DESTINATION DATA WRITE
USB SERIAL No. INPUT
ADJUSTMENT PROGRAM
LCD SYSTEM ADJUSTMENTS
ERROR
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
• Use this Service Manual together with the Automatic Adjustment Program (DSC-T77 Auto-Adj Ver_1.2r03.exe).
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
6-1
DSC-T77_ADJ
LCD, Touch panel unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Audio, Video amp.)
(PITCH, YAW sensor)
FL001
LCD901
D004
IC304
IC601
SE510
(COMPLETE)
Flash unit
LCD block
ST-199 board
SY-207 board
SY-207 board
SY-207 board
ST-199 board
SY-207 board
Destination Data Write
Destination data write
z
USB Serial No. Input
USB serial No. input
z
Composite video level
adjustment
adjustment
Composite video level adj.
z
z
Component out Y level adj.
Component out Pb level adj.
Component out Pr level adj.
Hall adj.
Auto orientation adj.
CAMERA adjustment 2
Wide limit adj.
z
z
CAMERA adjustment 3
Flange back adj.
z
z
z
CAMERA adjustment 4
Flange back check
z
z
z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 7
Strobe adj.
z
z
z
z
z
CAMERA adjustment 8
Auto focus illumination check
z
z
z
CAMERA adjustment 9
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
Touch panel adjustment
Touch panel adj.
z
z
(COMPLETE) (Note)
Adjusting item
Adjustment
z
Lens block
CCD block assy (Including CD-743 flexible board and CCD imager)
z
CAMERA adjustment 6
z
CAMERA adjustment 5
z
z
LCD adjustment
z
z
CAMERA adjustment 1
Component video level
adjustment
adjustment
z
z
z
z
z
Block
replacement
Mounted parts
replacement
Board
replacement
Replaced parts
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note:
When replacing the SY-207 board, erase the data in internal memory of the board before replacement.
Table 6-1-1
SECTION 6
ADJUSTMENTS
6-2
DSC-T77_ADJ
Personal computer
(Note 1)
(Note 1)
J-1
J-11
J-10
J-8
HASP key and application
for adjustment (SeusEX)
for adjustment (SeusEX)
Contact our service headquarters of each
area how to get the application for
adjustment (SeusEX) and HASP key.
area how to get the application for
adjustment (SeusEX) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-5
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-7
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Background paper
J-2501-130-A
J-2501-130-A
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6082-562-A
J-6
USB, A/V, DC IN cable
for multi-use terminal
1-830-848-21
for multi-use terminal
1-830-848-21
J-3
J-9
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
AC power adaptor
AC-LS5
1-479-284-51
AC-LS5
1-479-284-51
J-12
USB cable
1-829-868-41
1-829-868-41
J-4
J-14
Camera table
J-6082-384-A
J-6082-384-A
J-15
Component
video out jig
J-6082-659-A
video out jig
J-6082-659-A
Tripod Adaptor
J-6082-577-B
J-6082-577-B
J-13
360 mm
155 mm
280 mm
woody board A
woody board A
9 colors chart
135 mm
Fig. 6-1-1
1-2. List of service tools
• Oscilloscope
• Color monitor
Note 1:
Personal computer
OS:
OS:
Windows 2000/XP/Vista
RAM: 256 MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Note 2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it matches
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
Ver. 1.1 2008.12
6-3
DSC-T77_ADJ
Fig. 6-1-2
Note:
The set must be connected to the Component video out jig when performing the “Component out (Y, Pb, Pr) level adjustment” in
the “Video System Adjustment”.
the “Video System Adjustment”.
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS
1-1-1.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-2.
2) Start up the application for adjustment (SeusEX).
2) Start up the application for adjustment (SeusEX).
PC
(The SeusEX must be installed in the PC.)
OS: Windows 2000/XP/Vista
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Audio
(Black)
(Black)
Video
(yellow)
(yellow)
Color monitor
Video system Adjustment
(Composite video level adj.)
(Composite video level adj.)
Oscilloscope
Terminated
75
75
Ω
AC IN
AC power adaptor
AC-LS5
(1-479-284-51)
AC-LS5
(1-479-284-51)
USB, A/V, DC IN cable
for multi-use terminal
(1-830-848-21)
for multi-use terminal
(1-830-848-21)
HASP Key
To DC IN jack
To USB
connector
connector
DISP SEL switch setting
TV: Video/Camera
System Adjustment
System Adjustment
CAMERA: LCD
System Adjustment
System Adjustment
To Multi connector
Tripod Adaptor
(J-6082-577-B)
(J-6082-577-B)
Camera table
(J-6082-384-A)
(J-6082-384-A)
Ver. 1.1 2008.12