DSC-T11 (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 3

— 3 —

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs

of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

2-050-819-01 MANUAL, INSTRUCTION SET (JAPANESE) (J)
2-050-819-11 MANUAL, INSTRUCTION SET (ENGLISH) (EXCEPT KR, J)
2-050-819-31 MANUAL, INSTRUCTION SET (SPANISH/PORTUGUESE)

(E, JE)

2-050-819-51 MANUAL, INSTRUCTION SET

(TRADITIONAL CHINESE/SIMPLIFIED CHINESE) (E, HK, CH, JE)

2-050-819-71 MANUAL, INSTRUCTION SET (ARABIC) (E)

Make sure that the following accessories are supplied with your camcorder.

• Abbreviation

AUS : Australian model
CH

: Chinese model

HK

: Hong Kong model

KR

: Korea model

JE

: Tourist model

J

: Japanese model

“Memory stick Duo” (1)
(MSA-M32A)
(Note1)

AC-LM5 AC Adaptor (1)

0

 1-479-284-42

Power cord (Main lead) (1)
(AUS model)

0

 1-827-945-11

Power cord (Main lead) (1)
(E model)

0

 1-823-946-12

Power cord (Main lead) (1)
(CH model)

0

 1-782-476-15

Power cord (Main lead) (1)
(HK model)

0

 1-783-374-11

Power cord (Main lead) (1)
(JE model)

0

 1-790-732-12

Power cord (Main lead) (1)
(J model)

0

 1-791-637-13

Power cord (Main lead) (1)
(KR model)

0

 1-776-985-11

A/V connecting cable (1)
1-824-111-11

CD-ROM
(USB Driver SPVD-013) (1)
(E, HK, AUS, CH, JE,
KR model)
3-087-330-01
CD-ROM
(USB Driver SPVD-013 (I)) (1)
(J model)
3-087-331-01

2-pin conversion adaptor (1)
(E, HK model)
1-569-008-12

UC-TB USB cradle (1)
1-818-572-11

USB cable (1)
1-828-073-11

2-pin conversion adaptor (1)
(JE model)
1-569-007-12

2-050-819-81 MANUAL, INSTRUCTION SET (KOREAN) (JE, KR)
2-050-820-01 MANUAL, INSTRUCTION (for PC)(JAPANESE) (J)
2-102-625-01 CASE, CARRYING

Wrist strap (1)
3-086-283-01

Memory stick Duo Adaptor(1)
(MSAC-M2)
(Note1)

NP-FT1 battery pack (1)
(Note1)

The components identified by mark 

0 or dotted

line with mark 

0 are critical for safety.

Replace only with part number specified.

Note1 : This item is supplied with the unit as an accessory.

but is not prepaked as a service part.