DSC-HX20, DSC-HX20V, DSC-HX30, DSC-HX30V (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 9

Read Sony DSC-HX20 / DSC-HX20V / DSC-HX30 / DSC-HX30V (serv.man2) Service Manual online

DSC-HX20/HX20V/HX30/HX30V_L2
1-6
1-8.  CHECKING THE Wi-Fi FUNCTION
Perform the following procedure to check the Wi-Fi function.
Required equipment: Windows personal computer with Wi-Fi interface
1.  Turn on the power of the unit.
2.  Touch the Play button to display the captured image.
3.  Touch the Wi-Fi button to display the smartphone transfer screen.
4.  Touch “This image” on the smartphone transfer screen to open the “Wi-Fi Standby…” screen.
5.  When preparation for Wi-Fi has been completed, the “It functions as an access point. ” screen opens and a password for Wi-Fi connection is dis-
played.
 
When preparation for Wi-Fi has been completed, the following screen opens and a password for Wi-Fi connection is displayed.
View on Smartphone
Awaiting connection to the smartphone.
If functions as an access point.
SSID :
 
DIRECT-E6C0:DSC-XXXXX
Password   :
 
XXXXXXXX
Device Name               : 
DSC-XXXXX
Wi-Fi
6.  Confirm on the personal computer that the unit is detected as a connectable wireless network.
7.  To further confirm that the unit is connectable, connect the unit to the personal computer and select “Network and Internet” → “Manage Wireless 
Networks” from Control Panel to open the network connection list. The unit is included in the list.
– ENGLISH –
1-1.  SY-325基板交換時の注意
仕向けデータ
補修用基板と交換する時,補修用基板に書かれている仕向けデータは元の設定と違っている場合があります。
Adjust StationからAdjust Manualを起動させて「DESTINATION DATA WRITE」を実行させてください。
リストアデータ
補修用基板と交換する時,交換前の基板よりデータを取得してください。
データの取得はAdjust StationからAdjust Manualを起動させて「RESTORE DATA」を実行させてください。
本機で取得されるデータは下記になります。
・ USB SERIAL No.
・ Wide Limit Data
・ Angular Velocity Sensor sensitivity adjustment
・ AWB standard data input & check, Color reproduction check
・ Strobe adjustment
ネットワーク設定の消去
SY-325基板を交換する際は,基板を交換する前にお客様のネットワーク設定を消去してください。
Adjust Manual の DATA タブにある, 
「NETWROK SETTING RESET」を実施してください。
PlayMemories Homeについて
本機の内蔵メモリー内にはPlayMemories Homeが書き込まれています。
補修用SY-325基板は,PlayMemories Homeが書き込まれた状態で供給されます。
USBシリアルNo.
セットは,1台毎に異なる固有のID(USB Serial No.)を書き込んだ後,出荷されています。
新品の補修用基板には,このIDが書き込まれていないので,基板交換後にIDを入力する必要があります。
Adjust StationからAdjust Manualを起動させて「USB SERIAL No. INPUT」を実行させてください。
角速度センサ
補修用基板と交換する時,角速度センサ(SE401)の感度表示を書き留めてください。
Adjust StationからAdjust Manualを起動させて「Angular velocity sensor sensitivity adj.」を実行させてください。
P
Y
P
Y
Type A:
Type B:
SE401
SY-325 BOARD (SIDE A)
P: PITCH 感度表示
Y: YAW 感度表示
Note:SY-325基板のSE401感度表示は補修用基板にしか記載されておりません。
MAC アドレスの更新
Wi-Fi 搭載基板を交換した時,またはメイン IC (CPU) が搭載されている基板を交換した場合,IC の固有番号 (MAC アドレス) を取り
込み直す必要があります。
下記の作業を実施して,IC の固有番号 (MAC アドレス) を取り込み直してください。
1.  TISSホームページより 最新版の Adjust manual をダウンロードする。
2.  ダウンロードした Adjust manual をインストールする。
3.  ADJUST タブにある「Wireless LAN check」を実施する。
– JAPANESE –
The changed portions from
Ver. 1.5 are shown in blue.
Ver. 1.6 2013.03
Page of 34
Display

Click on the first or last page to see other DSC-HX20 / DSC-HX20V / DSC-HX30 / DSC-HX30V (serv.man2) service manuals if exist.