Read Sony DSC-F828 (serv.man3) Service Manual online
SERVICE MANUAL
DIGITAL STILL CAMERA
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.0 2003. 12
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Korea Model
Tourist Model
Chinese Model
Japanese Model
DSC-F828
— 2 —
DSC-F828
SPECIFICATIONS
x Camera
[System]
[System]
Image device 11 mm (2/3 type) color
CCD
4-color filter (RGBE)
4-color filter (RGBE)
Total pixels number of camera
Approx. 8 314 000 pixels
Effective pixels number of camera
Approx. 8 068 000 pixels
Lens
Carl Zeiss Vario-Sonnar T*
7.1
7.1
×
zoom lens
f=7.1 to 51 mm
(35 mm camera conversion: 28 to
200 mm)
F2.0-2.8
(35 mm camera conversion: 28 to
200 mm)
F2.0-2.8
Filter diameter: 58 mm (2
3
/
8
inches)
Exposure control
Automatic, Shutter speed priority,
Aperture priority, Manual exposure,
Scene selection (4 modes)
Aperture priority, Manual exposure,
Scene selection (4 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash,
One-push
Fluorescent, Incandescent, Flash,
One-push
File format (DCF compliant)
Still images: Exif Ver. 2.2, JPEG
compliant, RAW, TIFF, DPOF
compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
compliant, RAW, TIFF, DPOF
compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
Recording medium
“Memory Stick”, Microdrive,
CompactFlash card (TypeI/TypeII)
CompactFlash card (TypeI/TypeII)
Flash
Recommended distance (when ISO
sensitivity is set to Auto)
0.5 to 4.5 m (19
sensitivity is set to Auto)
0.5 to 4.5 m (19
3
/
4
inches to
14 feet 9
1
/
4
inches) (W)
0.6 to 3.3 m (23
5
/
8
inches to
10 feet 10 inches) (T)
Viewfinder
Electric viewfinder (color)
[Output connectors]
A/V OUT (MONO) jack (Monaural)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω
, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Audio: 327 mV (at a 47 k
Ω
load)
Output impedance 2.2 k
Ω
Accessory jack
Mini-minijack (ø 2.5 mm)
USB jack
mini-B
USB communication
Hi-Speed USB (USB 2.0 High-
Speed compliant)
Speed compliant)
[LCD screen]
LCD panel used
4.6 cm (1.8 type) TFT drive
Total number of dots
134 400 (560
×
240) dots
[Finder]
LCD panel used
1.1 cm (0.44 type) TFT drive
Total number of dots
235 200 (980
×
240) dots
[Power, general]
Used battery pack
NP-FM50
Power requirements
7.2 V
Power consumption (during shooting with LCD
screen on)
2.2 W
2.2 W
Operating temperature range
0
°
to
+
40
°
C (32
°
to
+
104
°
F)
(When using the Microdrive:
+
5
°
to
+
40
°
C (41
°
to
+
104
°
F))
Storage temperature range
−
20
°
to
+
60
°
C (
−
4
°
to
+
140
°
F)
Dimensions (lens: W-end)
134.4 91.1 157.2 mm
(5
3
/
8
3
×
5
/
8
×
6
1
/
4
inches)
(W/H/D, protruding portions not
included)
included)
Mass
Approx. 955 g (33.7 oz) (battery
pack NP-FM50, “Memory Stick,”
shoulder strap, lens cap, and so on
included)
pack NP-FM50, “Memory Stick,”
shoulder strap, lens cap, and so on
included)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching II
Compatible
PictBridge
Compatible
x AC-L15A/L15B AC Adaptor
Power requirements
AC 100
−
240 V, 50/60 Hz
Current consumption
0.35
−
0.18 A
Power consumption
18 W
Output voltage
8.4 V DC, 1.5 A
Operating temperature range
0
°
to
+
40
°
C (32
°
to
+
104
°
F)
Storage temperature range
−
20
°
to
+
60
°
C (
−
4
°
to
+
140
°
F)
Maximum dimensions
Approx. 56
×
31
×
100 mm
(2
1
/
4
×
1
1
/
4
×
4 inches) (W/H/D),
excluding projecting parts
Mass
Approx. 190 g (6.7 oz) excluding
power cord (mains lead)
power cord (mains lead)
x NP-FM50 battery pack
Used battery
Lithium-ion battery
Maximum voltage
DC 8.4 V
Nominal voltage
DC 7.2 V
Capacity
8.5 Wh (1 180 mAh)
Accessories
• AC Adaptor (1)
• Power cord (mains lead) (1)
• USB cable (1)
• Battery pack NP-FM50 (1)
• A/V connecting cable (1)
• Shoulder strap (1)
• Lens cap (1)
• Lens cap strap (1)
• Lens hood (1)
• CD-ROM (USB driver: SPVD-013) (1)
• CD-ROM (Image Data Converter) (1)
• Operating Instructions (1)
Design and specifications are subject to change
without notice.
without notice.
×
×
— 3 —
DSC-F828
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
— 4 —
DSC-F828
Note : The error code is cleared if the battery is removed, except defective flash unit.
*1: The error display is given in two ways.
Display Code
C:32:01
C:13:01
E:91:01
E:61:00 *1
E61:10 *1
Countermeasure
Turn off the main power then back on.
Replace the memory stick.
Format the memory stick with the DSC-F828.
Format the memory stick with the DSC-F828.
Checking of flash unit or replacement of
flash unit.
flash unit.
Checking of lens drive circuit
Cause
Trouble with hardware.
• The type of memory stick that cannot be
used by this machine, is inserted.
• Data is damaged.
• Unformatted memory stick is inserted.
• Unformatted memory stick is inserted.
Abnormality when flash is being
charged.
charged.
When failed in the focus initialization.
Caution Display During Error
SYSTEM ERROR
MEDIA ERROR
Flash LED
Flash display
Flashing at 3.2 Hz
Flash display
Flashing at 3.2 Hz
—
Self-diagnosis display
• C: ss: ss
• C: ss: ss
The contents which can be handled
by customer, are displayed.
by customer, are displayed.
• E: ss: ss
The contents which can be handled
by engineer, are displayed.
by engineer, are displayed.
[Description on Self-diagnosis Display]