Read Sony MEX-DV700 / MEX-DV707 Service Manual online
MEX-DV700/DV707
6
1
2
3
A
TOYOTA
to dashboard/center console
Bracket
Bracket
B
NISSAN
ʙ
ʙ
to dashboard/center console
Bracket
Bracket
ʙ
ʙ
1
2
Foot brake type
Parking brake switch cord
Hand brake type
Parking brake switch cord
q
ʖ
q
q
ʕ
ʓ
Face the hook inwards.
182 mm
53 mm
ʓ
Claws
Dashboard
Fire wall
ʖ
ʗ
ʘ
ʓ
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
Existing parts supplied with your car
Existing parts supplied with your car
lu ëCĆ
×ÙGÏ×
~<Ê ÙÏv×
ëÚÏygÏ
EcfbfW 8 {RÏy? × 5
ЯQ
ЯQ
Ğ|R{W glvlě/×ÙGÏ× ;
fW<Ï l; ëyG üÏÙÏ ×>W Òl][Q
ëÚÏygÏ
EcfbfW 8 {RÏy? × 5
ëÚÏygÏ
EcfbfW 8 {RÏy? × 5
ЯQ
ЯQ
Ğ|R{W glvlě/×ÙGÏ× ;
fW<Ï l; ëyG üÏÙÏ ×>W Òl][Q
ëÚÏygÏ
EcfbfW 8 {RÏy? × 5
.yfu× ÙÏ{Q @Ï× ; ìÙ Ï٠ЯQ
ğvlě|W{< ág
F× |W{< ĘfüF fF
F× |W{< ág
F× |W{< ĘfüF fF
ÒÏ×Ïy]SÏ n?S
Y_SÏ ÙÏy>
mSl6
Ï
YQË yR bW 5 × 8
mfRESÏ ÑyJlQ
FìùÏ îìl Ï æìydYSÏ/ÒÏ×Ïy]SÏ n?S MÍ
mfRESÏ ÑyJlQ
<ÙlfF W n`P{W Ñ×>AÏ ÉÏ|>ùÏ
Ï
YQË yR bW 5 × 8
Ï
YQË yR bW 5 × 8
mfRESÏ ÑyJlQ
FìùÏ îìl Ï æìydYSÏ/ÒÏ×Ïy]SÏ n?S MÍ
mfRESÏ ÑyJlQ
<ÙlfF W n`P{W Ñ×>AÏ ÉÏ|>ùÏ
Ï
YQË yR bW 5 × 8
.@ÏybS ïleW ål[!Ï ]>Ï
éy`SÏ WÏ{P
üÏySÏ ål`v÷Ï WÏ{P Cf^< bF
nvìyv WÏ{P
üÏySÏ ål`v÷Ï WÏ{P Cf^< bF
4063$&0''
A
B
Precautions
• Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
• Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in
direct sunlight or near heater ducts.
direct sunlight or near heater ducts.
• Use only the supplied mounting hardware for a safe
and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake
cord
cord
Be sure to connect the parking cord (Light green) of
ʔ
to the parking brake switch cord. The mounting position
of the parking brake switch cord depends on your car.
Consult your car dealer or your nearest Sony dealer for
further details.
of the parking brake switch cord depends on your car.
Consult your car dealer or your nearest Sony dealer for
further details.
Removing the protection collar
and the bracket
and the bracket
Before installing the unit, remove the protection
collar
collar
ʖ and the bracket ʓ from the unit.
1
Remove the protection collar
ʖ.
Pinch both edges of the protection collar
ʖ, then
pull it out.
2
Remove the bracket
ʓ.
ɞ Insert both release keys ʕ together between
the unit and the bracket
ʓ
until they click.
ɟ Pull down the bracket
ʓ
, then pull up the unit
to separate.
Mounting example
Installation in the dashboard
Notes
• Bend these claws outward for a tight fit, if necessary (
• Bend these claws outward for a tight fit, if necessary (
ǹ-2).
• Make sure that the 4 catches on the protection collar
ʖ are
properly engaged in the slots of the unit (
ǹ-3).
Mounting the unit in a Japanese
car
car
You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your Sony dealer.
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws
To prevent malfunction, install only with the supplied screws
ʙ.
How to detach and attach the
front panel
front panel
Before installing the unit, detach the front panel.
ǻ-A To detach
Before detaching the front panel, be sure to press and
hold
hold
ůƙƕƛƘƉƋŶƕƌƌŰ. Press , and pull it off towards
you.
ǻ-B To attach
Engage part
ʭ of the front panel with part ʮ of the unit,
as illustrated, and push the left side into position until it
clicks.
clicks.
Warning if your car’s ignition
has no ACC position
has no ACC position
Be sure to set the Auto Off function. For details, see the
supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
ůƙƕƛƘƉƋŶƕƌƌŰ until the display disappears each time
you turn the ignition off.
you turn the ignition off.
RESET button
When the installation and connections are completed,
be sure to press the RESET button with a ball-point pen,
etc., after detaching the front panel.
be sure to press the RESET button with a ball-point pen,
etc., after detaching the front panel.
Click on the first or last page to see other MEX-DV700 / MEX-DV707 service manuals if exist.