CX-LMNV5, XR-MNV5 - Sony Car Audio Service Manual (repair manual). Page 4

4

This section is extracted
from instruction manual.

Refer to the pages indicated in parentheses for details.

1

4
5

6

2

3

7

8

9

0

!

1

6

Switches the unit on and off (standby).

2 E

Starts and pauses CD play.

Selects tuner function and the tuner band.

d

Starts playback and changes the playback side.
Also used to enter 4-second blank spaces during
recording.

Selects the function of external equipment connected to
AUX IN jacks.

3

Sets the ECO mode on or off.

Starts recording and CD play simultaneously.

Starts and pauses recording.

4

Plug in optional headphones set with a stereo mini plug
(ø3.5 mm). Speaker output is cancelled.

5 s

v

CD and Tape: stops playback.
Tuner: clears a preset station.

f

r-

+t

g

CD: skips to a previous or a succeeding track when
pressed, searches a track in fast forward or reverse
playback when held down.
Tape: rewinds or fast forwards the tape.
Tuner: manually tunes up or down within the band.

6

Adjusts the volume.

7

Adjusts the treble level.

Adjusts the bass level.

8 z

Ejects the disc(s).

Selects a disc slot.
Starts CD play for one desired disc.

9

Produces rich and clear low frequency sound.
Switches DEMO on and off while the unit is turned off.

0

z

Opens or closes the cassette holder.

!

Plug in an optional microphone with a stereo mini plug
(ø3.5 mm).

Refer to the pages indicated in parentheses for details.

8

4

7

6

5

1
2
3

1

Ω

Plug in the supplied AM and FM antennas.

2

Sets the color system of the video signal output via the
VIDEO OUT jack. Turn off the power, and then set the
switch according to your TV set:

- NTSC: When connecting to an NTSC system TV.

- AUTO: When connecting to a multi color system TV.

- PAL: When connecting to a PAL system TV.

•In case of setting the switch to "

", you need to

adjust the color system according to your VCD to play
back. Hold down SHIFT and SLOW for about 6 seconds
in stop mode in CD function, and "

" (initial) or

"

" appears on the display (except when the

loaded disc is MP3-CD).

When playing back a PAL VCD, hold down SHIFT and
SLOW and then release them when "

" appears.

When playing back an NTSC VCD, do the same
procedure and release it when "

" appears.

When the function is changed or the unit is turned off,
PAL is restored.

•This unit does not support color system other than

PAL and NTSC, such as NTSC 4.43 or SECAM.

•If there is a color or picture trouble in the AUTO mode,

select NTSC or PAL.

3

Outputs video signals.
Connect to the video input jack of your TV set with the
supplied video connecting cord. Select the appropriate
video input on your TV. Refer to the operating instructions
of your TV.

4

Accept analogue sound signals from external equipment.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to R jack, white
plug to L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press AUX.
To change a source name in the display of the
AUX function
Hold down AUX and press POWER while the power is
on.

5

3

Connect the speaker cords of the supplied speakers.

6

3

Connect optional powered sub woofer with a built-in
amplifier to the jack.

7

Switches AC voltage between 120V, 220V and 230V-
240V.
Make sure it matches your local voltage.

8