Read Sony XDR-S10HDIP Service Manual online
XDR-S10HDiP
4
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
"
iPod
7 and VOLUME + buttons
have a tactile dot.
Size AAA (R03) × 2
Preparing the remote
commander
commander
Installing the batteries into the remote
commander (See Fig.
commander (See Fig.
")
Insert two size AAA (R03) batteries (not
supplied).
supplied).
When to replace the batteries
With normal use, the batteries should last for
about six months. When the remote commander
no longer operates the unit, replace all the
batteries with new ones.
about six months. When the remote commander
no longer operates the unit, replace all the
batteries with new ones.
Notes
• Do not charge dry batteries.
• When you are not going to use the remote
• Do not charge dry batteries.
• When you are not going to use the remote
commander for a long time, remove the
batteries to avoid any damage caused by leakage
and corrosion.
batteries to avoid any damage caused by leakage
and corrosion.
Using the remote
commander
commander
Common buttons that appear on both the remote
commander and the unit control the same
functions.
commander and the unit control the same
functions.
ALARM button
Press to set the alarm to “ON” or “OFF.”
Press and hold for 2 seconds to enter “ALARM
TIME SET.”
Press to set the alarm to “ON” or “OFF.”
Press and hold for 2 seconds to enter “ALARM
TIME SET.”
TONE button
To set the tone directly.
To set the tone directly.
HD SCAN button
The selected band is scanned, and receivable HD
Radio stations are played for 3 seconds in order of
frequency.
The selected band is scanned, and receivable HD
Radio stations are played for 3 seconds in order of
frequency.
SCAN button
The selected band is scanned, and receivable
radio stations are played for 3 seconds in order of
frequency.
The selected band is scanned, and receivable
radio stations are played for 3 seconds in order of
frequency.
BRIGHT button
To adjust the brightness of the display.
To adjust the brightness of the display.
To change the display to the
daylight saving time
(summer time) indication
daylight saving time
(summer time) indication
1
Press MENU to show the menu display.
2
Press SEL
7
or
W
to select “DST,” then
press ENTER.
3
Press SEL
7
or
W
to select “ON,” then
press ENTER.
“
” appears and the time indication changes
to summer time.
To deactivate the DST function, select “OFF” in
step 3.
step 3.
AC power cord
Setting the clock
1
Plug in the unit.
The display will flash “AM 12:00.”
2
Press MENU to show the menu display.
3
Press SEL
7
or
W
to select “TIME SET,”
then press ENTER.
The hour will start to flash in the display.
4
Press SEL
7
or
W
until current hour
appears in the display, then press ENTER.
The hour is set and the minutes start to flash.
5
Repeat step 4 to set the minute.
Note
If you do not set the menu within 65 seconds, the
setting mode is canceled.
If you do not set the menu within 65 seconds, the
setting mode is canceled.
#
The iPod
V and VOLUME + buttons have a tactile dot.
Tag indicator
Click on the first or last page to see other XDR-S10HDIP service manuals if exist.