DAV-TZ210, DAV-TZ230, DAV-TZ510, DAV-TZ630, DAV-TZ710, HBD-TZ210, HBD-TZ230, HBD-TZ510, HBD-TZ630, HBD-TZ710 - Sony Audio Service Manual (repair manual). Page 7

Read Sony DAV-TZ210 / DAV-TZ230 / DAV-TZ510 / DAV-TZ630 / DAV-TZ710 / HBD-TZ210 / HBD-TZ230 / HBD-TZ510 / HBD-TZ630 / HBD-TZ710 Service Manual online

HBD-TZ210/TZ230/TZ510/TZ630/TZ710
7
Discharge the charged electricity in capacitors to prevent electric shock as follows
When disassembling the machine, be sure to discharge the charged electricity in the following capacitors.
Use a resistor of 800 ohms, 2 Watts for discharging the following capacitors.
POWER board
   C903: 390V
   C932, C933, C934, CN904: 30V
Arranging the USB wire
Point of capacitor discharge for C932, C933, C934:
Connect to the red and black wire of CN904.
Point of capacitor discharge for C903:
Connect to the foot of C903.
800
:/2W
Have the USB wire spread on the inside 
of the claws of the chassis.
USB wire
USB wire
CN3000
CN509
CN901
CN906
brack
red
Tie up with LP3002.
Pass the wire from CN509 over the USB wire and insert it into CN906.
Draw the USB wire through CN3000.
Keep a distance of more than 6.5 mm 
between the wire and CN901. 
Keep the wire tied up from lying on 
the heat sink and the POWER board.
Page of 80
Display

Click on the first or last page to see other DAV-TZ210 / DAV-TZ230 / DAV-TZ510 / DAV-TZ630 / DAV-TZ710 / HBD-TZ210 / HBD-TZ230 / HBD-TZ510 / HBD-TZ630 / HBD-TZ710 service manuals if exist.