Read Sony CPF-IX001 / NAS-IX001P Service Manual online
4
NAS-IX001P
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Main unit
1 VOLUME +/–
2 FUNCTION
3 Remote sensor (inside)
2 FUNCTION
3 Remote sensor (inside)
4 SURROUND indicator
5 LINE indicator
6 ON indicator
5 LINE indicator
6 ON indicator
Network unit
1 Display window
2 Network illumination
3 LAN port
2 Network illumination
3 LAN port
4 WIRELESS/WIRED selector
5 RESET hole
6 Remote sensor
5 RESET hole
6 Remote sensor
List of button locations and reference pages
1
2
4 3
5
6
Subwoofer
1 Power switch ?/a
Remote control
Buttons for main unit
8 VOL +/–
9 TREBLE +/–
q; BASS +/–
qa EQ OFF
qs SURROUND
wa FUNCTION
9 TREBLE +/–
q; BASS +/–
qa EQ OFF
qs SURROUND
wa FUNCTION
Buttons for network unit
1 SUSPEND (On/Suspended mode)
2 DISPLAY
3 TIME
4 REPEAT
5 PLAY MODE
MUSIC SURFIN’
2 DISPLAY
3 TIME
4 REPEAT
5 PLAY MODE
MUSIC SURFIN’
6 ALL
6 GENRE
6 ARTIST
6 ALBUM
6 GENRE
6 ARTIST
6 ALBUM
7 +/– (select item)
qd WEB RADIO
qf PLAYL IST
qg ENTER
qh MENU +/–
qh
qd WEB RADIO
qf PLAYL IST
qg ENTER
qh MENU +/–
qh
./> (go back/go forward)
qj MENU
qk TCURSOR/CURSORt
qk
qk TCURSOR/CURSORt
qk
m/M (rewind/fast forward)
ql
N (play)
ql
X (pause)
ql
x (stop)
FAVO RITE
w; CALL
w; ADD
w; DEL
w; ADD
w; DEL
ws SLEEP
Quick Setup Guide
Step 2
the CPF-IX001 and your computer.
1
Connect the CPF-IX001 to the network
using a wired connection.
using a wired connection.
Connect the CPF-IX001 to your router (hub) or directly to the
LAN port of the computer. Use the supplied network cable.
Check that the WIRELESS/WIRED selector on the network unit
is set to WIRED.
LAN port of the computer. Use the supplied network cable.
Check that the WIRELESS/WIRED selector on the network unit
is set to WIRED.
Network cable (supplied)
To router (hub) or
LAN port of the
computer
LAN port of the
computer
To LAN port
WIRELESS/WIRED selector
Note
network settings” in the Operating Instructions.
When using the CPF-IX001 with a fixed IP address, refer to “Advanced
2
Turn on the system.
Power switch
3
Press FUNCTION repeatedly until the
LINE indicator on the main unit turns
off.
LINE indicator on the main unit turns
off.
4
Press SUSPEND to start up the network
unit.
unit.
5
Press
and check that music or
sample music is played.
It may take some time until music playback starts depending
on the network status. If “SERVER” appears, refer to “Selecting
another server” in the Operating Instructions.
on the network status. If “SERVER” appears, refer to “Selecting
another server” in the Operating Instructions.
SUSPEND
FUNCTION
wired connection.
This completes the settings when using the CPF-IX001 with a
When using the CPF-IX001 with a wireless connection, press
to stop music playback, then proceed to step 3.
to stop music playback, then proceed to step 3.
Step 1
the CPF-IX001.
Install the M-crew Server Ver. 2.0 software and prepare
1
Check the supplied items.
2
Insert the supplied M-crew Server
Ver. 2.0 software CD-ROM into your
computer.
Ver. 2.0 software CD-ROM into your
computer.
M-c rew ServerVer. 2.0
software CD-ROM
3
Prepare the remote.
Pull out the insulating sheet.
4
Install the CPF-IX001.
Connect the network unit on the main unit, and connect the
subwoofer to the DC IN jack on the back of the main unit.
subwoofer to the DC IN jack on the back of the main unit.
To DC IN jack
To the wall outlet
Network unit
Main unit
Subwoofer
Note
network unit.
Be sure to turn off the subwoofer when connecting or disconnecting the
Step 3
Make the wireless settings.
1
Confirm the settings of your wireless
system.
system.
Check the following items of your wireless LAN router to set the
same information for the CPF-IX001.
same information for the CPF-IX001.
SSID:
Security mode:
Key:
Tips
For details on how to check the wireless LAN router settings, refer to the
operation manual of your wireless LAN router.
operation manual of your wireless LAN router.
details, refer to the operation manual of your wireless LAN router.
Check that your wireless LAN router uses the latest firmware version. For
2
Press MENU.
Press
or
repeatedly until “WLAN SETUP?” appears,
then press ENTER.
The IP address appears in the diaplay.
MENU
ENTER
3
Start up the“WLAN Setup Assistant” on
your computer.
Select [Start] – [All Programs] – [M-crew Server] – [TOOLS]
– [WLAN Setup Assistant].
– [WLAN Setup Assistant].
4
Press NEXT.
Wait a moment for Internet Explorer to start up.
5
Enter“root”to“User name” in the Login
screen. Leave“Password” section blank,
and click [OK] to login.
root
6
Select the language.
7
Click“Wireless LAN Setup” in the Menu.
8
Enter the SSID,Security mode and Key
that you checked in step 1, and click
[Setup].
that you checked in step 1, and click
[Setup].
9
After finishing the setup, click“Restart
Audio Client” in the Menu.
10
Click [Restart.]
11
Disconnect the network cable from the
network unit, and set the WIRELESS/
WIRED selector toWIRELESS.
network unit, and set the WIRELESS/
WIRED selector toWIRELESS.
For details on how to operate the CPF-IX001, refer to
the Operating Instructions located in the “CPF-IX001
Users Manual” folder on the supplied CD-ROM.
the Operating Instructions located in the “CPF-IX001
Users Manual” folder on the supplied CD-ROM.
Follow the instructions on the screen and install the software.
The CPF-IX001 wireless settings are made using the
browser, so first astablish a wired connection between
browser, so first astablish a wired connection between
The Setup screen appears.
The CPF-IX001 restarts, and the settings are complete.
Click on the first or last page to see other CPF-IX001 / NAS-IX001P service manuals if exist.