LC-30HV2E (serv.man19). Using external equipment - Sharp TV User Guide / Operation Manual. Page 2

Option

MENU

Input Select

Input1

[AV]

RGB

AV

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

P

B

(C

B

)

COMPONENT

P

R

(C

R

)

Y

R - AUDIO - L

INPUT 3

INPUT 2

INPUT 1

RS-232C

DISPLAY OUTPUT1

DISPLAY OUTPUT2

AC INPUT
220–240V

AV OUTPUT

S-VIDEO

VIDEO

SCART cable
(commercially available)

You can use the INPUT 1 terminal when connecting a decoder and other audiovisual equipment.

When connecting to the INPUT 1 terminal, select “Input
1” on “Input Select” in the menu to set the correct input
signal type. (See page 49.)

The setting is stored and can be selected on the
“INPUT SOURCE” menu.

To watch a decoder image, select “INPUT1” from the
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display. (See page 49.)

A

• Each time b is pressed, the input source toggles.
• If the decoder image does not come in clearly, you may

need to change the input signal type setting on the “Input
Select” menu.

• It is recommended to connect to the INPUT 1 terminal

when using a decoder for ground wave signal input. If
INPUT 1 signals preset in auto installation or programme
setup, make sure to set “Decoder” to “INPUT1” in the
Programme Setup “Manual” menu. (See page 27.)

• Refer to your decoder operation manual for the signal type.