Read Sharp MX-6580N / MX-7580N (serv.man3) Service Manual online
MX-7580N SIMULATION 6 – 1
MX-7580N
Service Manual
[6] SIMULATION
1. General and purpose
The simulation mode has the following functions, to display the
machine operating status, identify the trouble position and causes
in an earlier stage and to efficiently setup and adjust the machine
for improved serviceability.
1) Various adjustments
2) Setting of the specifications and functions
3) Canceling troubles
4) Operation check
5) Counters check, setting clear
6) Machine operating conditions (operation hysteresis) data
machine operating status, identify the trouble position and causes
in an earlier stage and to efficiently setup and adjust the machine
for improved serviceability.
1) Various adjustments
2) Setting of the specifications and functions
3) Canceling troubles
4) Operation check
5) Counters check, setting clear
6) Machine operating conditions (operation hysteresis) data
check, clear
7) Various (adjustments, setting, operation, counters, etc) data
transport
The operating procedures and displays depend on the design of
the operation panel of the machine
the operation panel of the machine
Simulation mode
2. Function of each key
3. Starting the simulation
Entering the simulation mode
1) Double click the HOME key
2) Touch the Ver. Display section (10 key mode input mode
1) Double click the HOME key
2) Touch the Ver. Display section (10 key mode input mode
screen)
3)
Touch the (#) key → Asterisk (*) key → Clear key → Asterisk
(*) key → Ready for input of main code of simulation
(*) key → Ready for input of main code of simulation
Easy mode
Displays commonly used simulations for each category
allowing easy access for technicians to change settings,
perform maintenance and adjustments
allowing easy access for technicians to change settings,
perform maintenance and adjustments
Classic mode
All simulations are listed and can be accessed by
entering the main code, then sub code as per previous
model series
entering the main code, then sub code as per previous
model series
No.
Name
Function
1
TEST key
Change test mode
2
Mode setting key
Change mode (Easy mode, Classic mode)
3
Language setting key
Change language in simulation mode
4
INFO key
Display operation of current display
5
EXIT key
Exit from simulation mode
6
BACK key
Back to the previous display
7
CLEAR key
Clear input value
Click on the first or last page to see other MX-6580N / MX-7580N (serv.man3) service manuals if exist.