Read Sharp MX-6201N / MX-7001N (serv.man43) Service Manual online
MX-7001N FAN, FILTER SECTION S – 6
4)
Remove the screws (H), and remove the inner ventilation fan
motor (Center) (I).
* When installing, direct the label face (J) to the mounting
motor (Center) (I).
* When installing, direct the label face (J) to the mounting
plate side, and position the harness (L) in mark (K) side.
(8) Color process cooling fan motor, Inner ventilation
fan motor (right)
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the connector (C). Remove the screw (D), and
remove the color process cooling fan motor (E).
* When installing, attach so that the label (F) faces toward the
remove the color process cooling fan motor (E).
* When installing, attach so that the label (F) faces toward the
duct side.
4)
Remove the screws (F), and remove the flywheel (G) and (H).
* When installing, check to confirm that has not come in con-
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(H), the flywheel (G). (Equipping the mark to each color.)
5)
Disconnect the connector (I), and remove the snap band (J).
Parts
i
Color process cooling fan motor
j
Inner ventilation fan motor (right)
K
H
H
I
h
J
L
j
i
B
A
A
D
C
F
E
j
G
H
F
I
J
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man43) service manuals if exist.