Read Sharp AR-PE2 (serv.man6) Service Manual online
x
Preface
Terminology and conventions
The term “network administrator” refers to the person responsible for maintaining the
network at the customer site.
network at the customer site.
The term “Operation Panel”
describes the area on the front of the copier that includes
LEDs, a display window, and several control keys.
The term “PC” refers to any IBM PC or compatible computer running Windows over
MS-DOS.
MS-DOS.
The term “HDD” refers to the hard disk drive which is part of the Fiery AR-PE2
assembly.
assembly.
The term “Fiery AR-PE2” refers to the functional module that supports network
printing and associated features for the copier.
printing and associated features for the copier.
The note indicator highlights important messages and additional information.
The caution icon indicates a need for special care and safety when handling the
equipment.
equipment.
Precautions
Always observe the following general precautions when servicing the Fiery AR-PE2
assembly:
assembly:
1.
Never alter an existing network without permission.
The Fiery AR-PE2 is probably connected to an existing Local Area Network (LAN)
based on Ethernet hardware. The network is the link between the customer’s computer,
existing laser printers, and other prepress equipment. Never disturb the LAN by breaking
or making a network connection, altering termination, installing or removing
networking hardware or software, or shutting down networked devices without the
knowledge and permission of the network administrator.
based on Ethernet hardware. The network is the link between the customer’s computer,
existing laser printers, and other prepress equipment. Never disturb the LAN by breaking
or making a network connection, altering termination, installing or removing
networking hardware or software, or shutting down networked devices without the
knowledge and permission of the network administrator.
2.
Never assign an IP address in Network Setup.
Only the network administrator should assign an IP address on a network device.
Entering an incorrect IP address to the Fiery AR-PE2 can cause unpredictable errors on
any or all devices.
Entering an incorrect IP address to the Fiery AR-PE2 can cause unpredictable errors on
any or all devices.
3.
Follow standard ESD (electrostatic discharge) precautions while working on the internal
components of the copier.
components of the copier.
N
OTE
:
Click on the first or last page to see other AR-PE2 (serv.man6) service manuals if exist.