Read Sharp AR-PE1 (serv.man32) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 057
Page: 2 of 16
1) Configure the AR-PE1/2 for the network.
Before the AR-PE1/2 can be installed on NetWare 5.x, the AR-PE1/2 must have a valid IP
address and subnet mask. The following procedure uses the AR-C160 Sharp Digital Colour
Copier as an example. Complete the following steps to set the IP address from the Sharp
Digital Copier LCD panel.
a) Press the Print button on the Copier.
b) From the Copier LCD panel, press the Online key to take the unit offline.
c) Press
address and subnet mask. The following procedure uses the AR-C160 Sharp Digital Colour
Copier as an example. Complete the following steps to set the IP address from the Sharp
Digital Copier LCD panel.
a) Press the Print button on the Copier.
b) From the Copier LCD panel, press the Online key to take the unit offline.
c) Press
the
Fiery key to enter the Fiery Main Menu.
d) Press the Menu key, then scroll down to “Run Setup” and execute.
e) Enter “Network Setup” and execute the “Protocol Setup” key.
f) Run
“TCP/IP Setup” and enter the IP Address & Subnet Mask provided by the network
administrator.
g) A Gateway Address may also be entered if one is used on the Network. The network
administrator should also provide this address.
h) After changing these settings, exit the menus and save all changes (the Fiery controller
will then reboot).
i) Once the Copier/Print Controller is back online, confirm the IP & Subnet addresses by
printing a configuration page from the Fiery Main Menu.
2) Setup of the NDS objects with NetWare Administrator.
This bulletin will show how to setup the AR-C160/ AR-PE2 in the “System Support.alpha”
context of the “GALAXY” NDS tree. The directory structure will vary depending on the
network configuration.
a) Login to a NetWare Directory Services tree with administration rights to the context
where the printer will be installed.
b) Locate the executable file for NetWare Administrator :-
(SYS:\PUBLIC\ WIN32\NWADMN32.EXE for Windows OS Clients).
Execute by double clicking the file in Windows Explorer.
c) Highlight
the
NW5_Broker object on the NDS tree. Right click and choose details. Note:
the Broker object is automatically added during the Server installation. The Broker object
is automatically named “Servername_Broker.”
is automatically named “Servername_Broker.”
For this example = NW5_BROKER (NW5 being the server name).
Click on the first or last page to see other AR-PE1 (serv.man32) service manuals if exist.