AR-NB2 (serv.man13). Software setup guide, for AR-NB2 - Sharp Copying Equipment User Guide / Operation Manual. Page 5

Read Sharp AR-NB2 (serv.man13) User Guide / Operation Manual online

- 5 -
USING THE MACHINE IN A WINDOWS ENVIRONMENT
2. "Network Utilities" CD-ROM
This CD-ROM contains "Quick Setup" and "Standard Setup (NICManager)" which are used to 
configure network settings, "SC-Print2000" which is used to create an LPR port, and an online manual 
that explains network settings.
3. "Sharpdesk LT" CD-ROM
Install Sharpdesk LT (for Windows) from this CD-ROM. Sharpdesk LT is a desktop document 
management application that makes it easy to start applications and file documents and images.
For information on the "Sharpdesk LT" CD-ROM and the procedure for installing Sharpdesk LT, see 
operation manual for network scanner (PDF format).
HARDWARE AND SOFTWARE REQUIREMENTS
Check the following hardware and software requirements before installing the software.
*1 If you are installing the Printer Administration Utility in Windows 95, a system file must be updated before the 
utility can be installed. For more information, click the "Display Readme" button in the Software Selection 
window of the installer.
*2 Administrator's rights are required to install the software using the installer.
• SC-Print2000 is only used to create an LPR port in Windows 95/98/Me. If the printer driver is 
installed as explained in this manual, the LPR port is created automatically and thus there is 
normally no need to use SC-Print2000.
• NICManager is also contained in the "Software" CD-ROM. If the network settings are configured 
as explained in this manual, NICManager in the "Software" CD-ROM is used to configure 
machine settings.
• The term "Print Server Card" appears in the "Network Utilities" CD-ROM. Where "Print 
Server Card" appears, please substitute "Network expansion kit".
• If you use the "Network Utilities" CD-ROM to configure network settings, be sure to check 
the machine's Ethernet address (MAC address) by printing out the Printer Setting List as 
explained in "
CHECKING THE IP ADDRESS
". (The message that appears in the CD-ROM 
utility is not relevant.)
Computer type
IBM PC/AT or compatible computer equipped with a 10Base-T/100Base-TX LAN 
board
Operating system
Windows 95*
1
, Windows 98, Windows Me,
Windows NT Workstation 4.0 (Service Pack 5 or later)*
2
,
Windows 2000 Professional*
2
, Windows XP Professional*
2
,
Windows XP Home Edition*
2
Other hardware requirements An environment that allows any of the above operating systems to fully operate
Note
Caution
Page of 29
Display

Click on the first or last page to see other AR-NB2 (serv.man13) service manuals if exist.