Read Sharp AR-M700 (serv.man16) Service Manual online
: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 11
4) Remove the manual feed gate solenoid.
a-8. Manual feed paper pass detector 1
1) Remove the multi manual paper feed tray unit. (See “a. Multi man-
ual paper feed tray unit”)
2) Remove the bottom cover. (See “a-6. Torque limiter”)
3) Disconnect the connector, and remove the manual paper feed
paper pass detector 1.
a-9. Paper feed clutch
1) Remove the multi manual paper feed tray unit. (See “a. Multi man-
ual paper feed tray unit”)
2) Remove the upper cover. (See “a-3. Pickup roller”)
3) Remove the front cover.
4) Remove the interface pass earth plate, the E-ring, and the bearing,
and remove the manual paper feed mounting plate.
5) Remove the connector and the E-ring, and remove the paper feed
clutch.
∗
When assembling, fit the rotation stopper of the paper feed clutch
with the clutch fixing screw.
with the clutch fixing screw.
a-10. Paper pickup solenoid
1) Remove the multi manual paper feed tray unit. (See “a. Multi man-
ual paper feed tray unit”)
2) Remove the manual paper feed upper cover and the pickup upper
cover. (See “a-3. Pickup roller”)
3) Remove the front cover, and remove the manual paper feed
mounting plate. (See “a-9. Paper feed clutch”)
4) Remove the spring.
5) Disconnect the connector, and remove the paper pickup solenoid
unit.
6) Remove the paper pickup solenoid.
∗
When assembling, tighten the screw so that the lever tip is at
13±0.5mm from the frame edge with the solenoid plunger pulled.
13±0.5mm from the frame edge with the solenoid plunger pulled.
1
13 5mm
(Note for assembly)
Check that there is a clearance when the solenoid plunger is pulled.
1
4.2mm
Click on the first or last page to see other AR-M700 (serv.man16) service manuals if exist.