Read Sharp AR-DU1 (serv.man2) Service Manual online
3
Change the set value.
<Example>
•
When setting to one-digit value (5)
•
When setting to two-digit value (15)
When the value is changed by 1, the center position is shifted by
about 0.12mm.
about 0.12mm.
★
Reference of set value change
4
After adjustment, make a copy to check the center is not shifted.
If the center is shifted, repeat procedures
3
and
4
and check
again.
5
After adjustment, press the CA key to cancel the setting mode.
[EXECUTE]
Set value
With the above operation,
the set value can be changed.
the set value can be changed.
5
[EXECUTE]
1
5
[EXECUTE]
0
99
The image is shifted to the front
of the paper.
of the paper.
(Shipment setting value)
The image is shifted to the rear
of the paper.
of the paper.
– 4 –
Click on the first or last page to see other AR-DU1 (serv.man2) service manuals if exist.