AR-C200P (serv.man11). Windows 9x ME - Sharp Copying Equipment User Guide / Operation Manual. Page 120

OPERATION > 112

DOWNLOADING THE PRINT FILE TO USE AS AN OVERLAY

In the previous topic, you created a print (PRN) file on your PC's hard 
disk. This topic explains how download this file to the printer using 
the Storage Device Manager.

The Storage Device Manager is included with the original software 
CDs that were supplied with your printer.

Launch the Storage Device Manager and allow the program to 
discover (locate) the printer.

Click on [Project] then [New Project].

Select [Add File to Project] from the Project menu, and select 
the PRN file(s) that you created earlier.

PCL: This automatically generates a file BIN file.

Important: At this step, you will see in the project window that the file 
(BIN) file is assigned an ID number. You can change this ID number by 
double-clicking it, and entering a new one in the ID field.

PostScript: This automatically generates a PostScript hst file. Note 
the name that the file is assigned in the Storage Device Manager. 
Names are case sensitive.

Make sure the printer being used is highlighted in the lower 
window of the Storage Device Manager.

Select the [Project] menu and then choose [Send Project Files 
to Printer].

This downloads the file to the printer. The Storage Device 
Manager displays "Command Issued" to indicate that the file 
was downloaded successfully.

Close the Storage Device Manager.

For PCL and PS:This is important because you need to use this ID 
number  or name when creating overlays in the printer driver. 
Therefore, it is recommended you change the ID number or name from 
the default value and 

note it for later use

.