Read Sharp AR-C170 (serv.man54) User Guide / Operation Manual online
SPECIAL MODES
6-5
6
Erase
The erase function is used to erase the shadow lines on copies produced when copying thick originals or books. The
erase modes that can be selected are shown below. The erase width is approximately 10 mm (1/2") in it's initial
setting.
erase modes that can be selected are shown below. The erase width is approximately 10 mm (1/2") in it's initial
setting.
EDGE ERASE
Eliminates shadow lines around the edges of
copies caused when heavy paper or a book is used
as an original.
Eliminates shadow lines around the edges of
copies caused when heavy paper or a book is used
as an original.
CENTRE ERASE
Eliminates shadow lines produced by the bindings
of bound documents.
Eliminates shadow lines produced by the bindings
of bound documents.
EDGE + CENTRE ERASE
Eliminates shadow lines around the edges of
copies and eliminates the shadow at the centre of
copies.
Eliminates shadow lines around the edges of
copies and eliminates the shadow at the centre of
copies.
1
Touch the [ERASE] key on the SPECIAL
MODES screen.
MODES screen.
The erase setting screen
will appear.
The erase icon (
will appear.
The erase icon (
) will
also appear in the upper
left of the screen to
indicate that the function
is turned on.
left of the screen to
indicate that the function
is turned on.
2
Select the desired erase mode.
Select one of the three
erase modes. The
selected key will be
highlighted.
erase modes. The
selected key will be
highlighted.
3
Adjust the amount of erase and touch the
[OK] key.
[OK] key.
Use the
and
keys
to adjust the erase width
and then touch the [OK]
key.
and then touch the [OK]
key.
4
Touch the [OK] key on the SPECIAL
MODES screen.
MODES screen.
Return to the main screen of copy mode.
Original
Copy
ERASE
T
COVERS
EDGE
ERASE
ERASE
CENTRE
ERASE
EDGE+CENTRE
ERASE
EDGE
CANCEL
OK
10
(0 20)
mm
About the steps that follow
If a reversing single pass feeder is being used,
see pages 5-2 through 5-6. If the document
glass is being used, see pages 5-7 through 5-9.
If a reversing single pass feeder is being used,
see pages 5-2 through 5-6. If the document
glass is being used, see pages 5-7 through 5-9.
To cancel the erase function, touch the [CANCEL]
key on the erase setting screen.
key on the erase setting screen.
ex_apollon_06-1.fm 5 ページ ２００４年６月７日 月曜日 午後４時２分
Click on the first or last page to see other AR-C170 (serv.man54) service manuals if exist.