AR-C170 (serv.man22). Unpacking installation - Sharp Copying Equipment Service Manual (repair manual). Page 7

Read Sharp AR-C170 (serv.man22) Service Manual online

AR-C170M  UNPACKING AND INSTALLATION  5 - 7
11. Specifications setup
Used to set the specifications with SIM26 according to the cus-
tomer's request.
To customize the following items after completion of the destina-
tion setup, change the set values.
On completion of the installation of the AR-F13 finisher, please
change the default output tray of the machine to the top tray of the
finisher.
12. Image quality check
Check the following items related to image quality. For details of
the adjustment and checking procedures, refer to the chapter of
adjustments.
1) Image focus, image skew (Refer to ADJ 3.)
2) Image registration (Refer to ADJ 4.)
3) Image loss, void area (Refer to ADJ 10.)
4) Copy color balance, density (Refer to ADJ 11.)
Check that the above items are normal. If not, make the adjust-
ment.
13. Function and operation check
Check that the following operations are normal.
Print the various setup data and the adjustment data (list) with
SIM22-6 and keep the data.
In case of a memory trouble, if the data are not kept, all the adjust-
ments must be made again.
15. Necessary works before moving the 
machine
1) If the following options are installed, remove all of them from
the machine.
• Sorter
• Finisher
• Reverse unit
• RSPF unit
• Desk unit
2) Remove the following consumable parts from the machine.
• Paper
• Toner cartridge
• Photoconductor cartridge
3) Lock the following sections.
• Scanner (Optical section)
• Paper cassette lift plate
SIM No
Content
26
6
Used to set the destination. 
SIM No
Content
26
2
Used to set the large capacity paper feed tray paper 
size.
Used to set the detection paper size and display 
when using 8.5 x 13 size paper and document.
Used to set the paper kind and the display form in the 
manual paper feed mode.
3
Used to set the auditor specification mode.
5
Used to set the count mode of the total counter and 
the maintenance counter.
18
Used to set YES/NO of the toner save mode (Only in 
UK and Japan versions) For other destination 
versions, this setup is made by the user program.
52
Used to set YES/NO of counting when non-print 
paper is passed through each counter.
53
65
Used to set the limit number of sheets for stapling.
Check item
Installation
Key input operation (Operation 
panel)
Display (Operation panel)
Paper feed 
operation
Manual paper 
feed
Machine paper 
tray
Desk unit 
paper feed tray
When the desk unit is installed.
Paper size detection operation
Document 
size detection 
operation
Document 
table mode
RSPF mode
RSPF 
operation/
Duplex copy 
operation
S-S mode
D-S mode
S-D mode
When the desk unit with the 
duplex unit is installed. 
D-D mode
When the desk unit with the 
duplex unit is installed.
Bookbinding operation
When the finisher is installed.
Stapling operation
When the finisher is installed.
Grouping operation
When the 
finisher is 
installed.
When the 
sorter is 
installed.
Sorting operation
When the 
finisher is 
installed.
When the 
sorter is 
installed.
Page of 7
Display

Download Sharp AR-C170 (serv.man22) Service Manual (Repair Manual)