Read Sharp AR-156 (serv.man10) User Guide / Operation Manual online
29
5
Copier trouble?
MISFEED REMOVAL
●
Do not touch the photoconductive drum (green portion) when removing the
misfed paper. Doing so may damage the drum and cause smudges on copies.
misfed paper. Doing so may damage the drum and cause smudges on copies.
●
Do not remove the misfed paper from above the fusing unit. Unfixed toner on
the paper may stain the paper transport area, resulting in smudges on copies.
the paper may stain the paper transport area, resulting in smudges on copies.
Raise the fusing unit release lever and then close the side cover by pressing the round
projections near the side cover open button. The misfeed (
projections near the side cover open button. The misfeed (
) indicator will go out and
the ready (
) indicator will light up.
C Misfeed in the transport area
Lower the fusing unit release lever by rotating it all the way as shown in the illustration.
Fusing unit release lever
Push gently on both sides of the front cover and open it.
While you are lowering the fusing unit release lever, it will not move smoothly at
a location on the way. However, be sure to lower the lever by rotating it all the
way to the location where it will not rotate as shown in the right illustration.
a location on the way. However, be sure to lower the lever by rotating it all the
way to the location where it will not rotate as shown in the right illustration.
00C-5-156ex.p65
14/11/00, 10:50
29
Click on the first or last page to see other AR-156 (serv.man10) service manuals if exist.