Read Sharp AL-1644 (serv.man14) Service Manual online
AL-1633/1644 UNPACKING AND INSTALLATION 5-1
[5]UNPACKING AND INSTALLATION
3. Installing procedure
A. Set-up
1) Remove all pieces of tape, then open the SPF or the document cover
and remove the protective material.
2) Use a coin (or other suitable object) to remove the screw.
Note: Store the screw in the paper tray as described in step 6) because it
must be used if the machine has to be moved.
3) Install the TD cartridge.
For installation of the TD cartridge, see the next page.
4) Gentry lift and pull out the paper tray until it stops.
5) Remove the pressure plate lock.
Rotate the pressure plate lock in the direction of the arrow to remove
it while pressing down the pressure plate of the paper tray.
6) Store the pressure plate lock which has been removed in step 5) and
the screw which has been removed in step 2) in the front of the paper
tray.
To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
relevant location.
For two tray models, follow steps 4) to 6) for both the upper and lower
trays except for storage of the screw.
trays except for storage of the screw.
7) Ensure that the power switch of the machine is in the OFF position.
Plug the power cord into the nearest outlet.
Caution:
•If you use the machine in a country other than the country where the
machine was purchased, you will need to make sure that your local
power supply is compatible with your model. If you plug the machine
power supply is compatible with your model. If you plug the machine
into an incompatible power supply, irreparable damage to the machine
will result.
•Only insert the power cord into a properly grounded wall socket. Do not
use extension cords or power strips.
Note: Connect the machine to a power outlet which is not used for other
electric appliances. If a lighting fixture is connected to the same
outlet, the light may flicker.
Pressure
plate lock
Screw
[05]UNPACKING.fm 1 ページ ２００３年１１月２８日 金曜日 午前９時１６分
Click on the first or last page to see other AL-1644 (serv.man14) service manuals if exist.