Read Sharp R-27STM (serv.man3) User Guide / Operation Manual online
8
SETTING THE CLOCK
Your oven has a 12 hour and a 24 hour clock.
• To select the 12 hour clock, press and hold the
POWER LEVEL button for 3 seconds.
“12H” will appear in the display.
“12H” will appear in the display.
To set the time of day follow the instructions
opposite.
opposite.
1. Select the clock type required.
2. Enter the hours by turning the TIME/WEIGHT
knob.
3. Press the POWER LEVEL button once.
4. Enter the minutes by turning the TIME/WEIGHT
knob.
5. To start the clock, press the POWER LEVEL
button once.
NOTES:
• Press the STOP/CLEAR button if you make a
• Press the STOP/CLEAR button if you make a
mistake during programming.
• If the clock is set, when cooking is complete, the
display will show the correct time of day.
If the clock has not been set, the display will only
show “ : ” when cooking is complete.
If the clock has not been set, the display will only
show “ : ” when cooking is complete.
• If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show “88:88” after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
show “88:88” after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
• When you want to reset the time of day, follow
the opposite example again.
• To select the 24 hour clock, press and hold the
POWER LEVEL button for 3 seconds, then
press again.
“24H” will appear in the display.
press again.
“24H” will appear in the display.
x1
x1
x1 and hold for 3 seconds.
1. x1 and hold for 3 seconds.
2. x1 again.
2. x1 again.
R-27STM.indd 8
R-27STM.indd 8
9/4/08 2:26:47 PM
9/4/08 2:26:47 PM
Click on the first or last page to see other R-27STM (serv.man3) service manuals if exist.