Read Sharp UP-3300 (serv.man5) Handy Guide online
8
This is not a complete master reset 2 as the PLU data etc. will
remain in the memory, the master reset 2 from here refers to the
key allocation only.
remain in the memory, the master reset 2 from here refers to the
key allocation only.
Remember if selecting 3 x 8 or 4 x 8 for the single size key tops
this will apply to all the single size keys on all key screens.
this will apply to all the single size keys on all key screens.
As mentioned earlier the height of the main display area is also
changeable.
The smallest size is 3 keys high and the largest selection is 8 keys
high the size you select will then determine the remaining area for
key tops.
changeable.
The smallest size is 3 keys high and the largest selection is 8 keys
high the size you select will then determine the remaining area for
key tops.
Depending on the key top size and the display size you will be
able to allocate between 30 keys and 65 keys on each key screen.
able to allocate between 30 keys and 65 keys on each key screen.
The display layout size should be carried out before the Free Key
Layout as you may lose keys if the display area is increased in
size.
Layout as you may lose keys if the display area is increased in
size.
For example if there are keys assigned to the area below the
display and the display area is then increased these keys will be
lost.
display and the display area is then increased these keys will be
lost.
That concludes Guide-1, Key Screen and Display Layout.
Click on the first or last page to see other UP-3300 (serv.man5) service manuals if exist.