Read Sharp UP-800 (serv.man21) Service Manual online
Page 9 - 13
18.
Others
Below you will find descriptions of some basic specification changes in relation to the new introduced functions and
features.
features.
1.
Working time control with employee transaction file and CCD
Problem description:
If working time control is enabled and the employee transaction file exist, employees can not time out before the
relevant clerk reset has been carried out.
Reason: The individual Clerk Z report and also the All Clerk Z-Report are used to transfer available data from the
clerk file to the new Employee transaction file. But normally the individual clerk reset is prohibited in case of
Terminal-, Shift- or All Clerk-CCD.
If working time control is enabled and the employee transaction file exist, employees can not time out before the
relevant clerk reset has been carried out.
Reason: The individual Clerk Z report and also the All Clerk Z-Report are used to transfer available data from the
clerk file to the new Employee transaction file. But normally the individual clerk reset is prohibited in case of
Terminal-, Shift- or All Clerk-CCD.
Solution implemented:
In case of Terminal-, Shift- or All Clerk-CCD is set, the individual clerk Z report is now allowed in OPX/Z mode.
But it will not print out any report details to avoid possible CCD manipulation.
But it can be done in order to transfer the available data from this clerk to the new Employee transaction file and
allow afterwards that the Employee can do the WT- TimeOut operation
The relevant Employee / Clerk Key assignment is released after the WT-TimeOut operation and another
Employee can now use this Clerk key for trading.
In case of Terminal-, Shift- or All Clerk-CCD is set, the individual clerk Z report is now allowed in OPX/Z mode.
But it will not print out any report details to avoid possible CCD manipulation.
But it can be done in order to transfer the available data from this clerk to the new Employee transaction file and
allow afterwards that the Employee can do the WT- TimeOut operation
The relevant Employee / Clerk Key assignment is released after the WT-TimeOut operation and another
Employee can now use this Clerk key for trading.
Remark:
The above description is valid until the “last” employee of a working session tries to make a TimeOut. The “last”
employee must carry out the relevant CCD report prior to his WT-TimeOut.
The above description is valid until the “last” employee of a working session tries to make a TimeOut. The “last”
employee must carry out the relevant CCD report prior to his WT-TimeOut.
2.
Request from Satellite to Master at each registration
Problem description:
At each start of a registration a Satellite starts communication with the Master to obtain the employee code of the
clerk. This is also done if the individual clerk system is used.
However in case the Master is not reachable it may take up to 5 seconds before the Satellite is ready for
operation.
At each start of a registration a Satellite starts communication with the Master to obtain the employee code of the
clerk. This is also done if the individual clerk system is used.
However in case the Master is not reachable it may take up to 5 seconds before the Satellite is ready for
operation.
Solution implemented:
To avoid the mentioned delay at the beginning of a registration, the Satellite requests no longer the employee
code from the Master but will take the number from its own memory.
To avoid the mentioned delay at the beginning of a registration, the Satellite requests no longer the employee
code from the Master but will take the number from its own memory.
3.
Change of Base1 line of Item Buffer in T-LOG
Problem description:
Because the GLU code has been enlarged and the Employee code must be stored in the T-LOG a space
problem occurred in the Base1 line in T-LOG.
Because the GLU code has been enlarged and the Employee code must be stored in the T-LOG a space
problem occurred in the Base1 line in T-LOG.
Solution implemented:
A share of some memory has been introduced. Advance Order Date/Time/Tour and B.S. ORG GLU code are
sharing the same space because they are never valid at the same time.
A share of some memory has been introduced. Advance Order Date/Time/Tour and B.S. ORG GLU code are
sharing the same space because they are never valid at the same time.
Remark:
For a detailed description, please refer to the separate distributed excel sheet.
For a detailed description, please refer to the separate distributed excel sheet.
Click on the first or last page to see other UP-800 (serv.man21) service manuals if exist.