UP-600, UP-700 (serv.man25). UP600-700 Service Manual - Sharp ECR Service Manual (repair manual). Page 6

The mode switch has these settings:

This mode locks all register operations.
No change occurs to register data.

OP X/Z: This setting allows cashiers/clerks to take X or Z reports for

their sales information. (This setting may be used only
when your register has been programmed for "OP X/Z
mode available" in the PGM2 mode.)

For entering sales

To program those items that need to be changed often:
e.g., unit prices of departments, PLUs or EANs, and per-
centages

To program all PGM1 items and those items that do not
require frequent changes: e.g., date, time, or a variety of
register functions

For manager’s and submanager’s entries
The manager can use this mode to make entries that are
not permitted to be made by cashiers -for example, after-
transaction voiding and override entry.

To take the X/Z report for various daily totals

To take the X/Z report for various periodic (weekly or
monthly) consolidation

This POS terminal allows the operator to use clerk keys (real clerk
keys) for clerk identification.
12 real clerk keys are provided with your POS terminal, and a maxi-
mum 126 real clerk keys can be provided.

This key locks and unlocks the drawer. To lock it, turn 90 degrees
counterclockwise. To unlock it, turn 90 degrees clockwise.
(In case your POS terminal has not the drawer supplied by SHARP,
this key is not supplied.)

This key locks and unlocks the printer cover. To lock it, turn 90
degrees counterclockwise. To unlock, turn 90 degrees clockwise.

REG

OP

 X / Z

MGR

X

1

/Z

1

X

2

/Z

2

PGM

1

PGM

2

SRV

SRV'

SRV

MA

SM

MA

SM

SRV

• Manager key (MA)

• Submanager key (SM)

• Service key (SRV)

OP

• Operator key (OP)

SK1

-1