Read Sharp GENERAL (serv.man17) Service Manual online
UP-R01CK
Replacing clerk key (for UP-600/700)
– 3 –
3. Replacing clerk key (for UP-600/700)
Refer to UP-600/700 Installation MANUAL for “opening and closing cabinet”.
1) Remove the connector of a clerk key
1
and remove the clerk key
unit.
Remove the cover
2
, and remove the screw
3
and remove the
clerk key.
2) Attach the contactless key to the plate with screw
1
, and attach the
cover
2
. Attach the contactless key unit to the lower cabinet, and
set the connector
3
.
Attach the upper cabinet, attach the lid
4
, and attach the cap
5
tightly.
Note: The peojection
A
side of the lid
4
should be upper side.
Note: In case contactless key attaches, be sure to attach CE-Mark label
(accessories) to a bottom cabinet.
Using contactless key of the product with which CE-Mark is not
attached is forbidden by law.
Refer to the following figure for the attachment position of CE-Mark.
Refer to the following figure for the attachment position of CE-Mark.
1
2
3
1
2
3
4
5
A
****
Click on the first or last page to see other GENERAL (serv.man17) service manuals if exist.