Read Sharp DV-NC55 (serv.man52) User Guide / Operation Manual online
47
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
DVD Setup
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
PLUSCODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
3
Use ' or " to select “BITSTREAM” or “D-PCM”.
BITSTREAM:
Use this setting for a digital connection of a
receiver (amplifier) equipped with a Dolby Digital
decoder.
receiver (amplifier) equipped with a Dolby Digital
decoder.
D-PCM:
Use this setting for a digital connection to the
(Down Mix PCM)
PCM digital input jack of a DAT or MD, or for a
digital connection to a receiver (amplifier) that
does not have a Dolby Digital decoder.
digital connection to a receiver (amplifier) that
does not have a Dolby Digital decoder.
4
Press ENTER to confirm the setting.
5
Press RETURN to exit the SETUP screen and return to normal
screen.
• When you have completed the above setting, press RETURN
screen.
• When you have completed the above setting, press RETURN
to exit the SETUP screen. However, if you want to specify the
“MPEG” setting in succession, proceed to step 1 below.
“MPEG” setting in succession, proceed to step 1 below.
Setting the MPEG
• Before setting the “MPEG”, perform the step 1 to 2 on pages 45 and 46.
1
Press ENTER and then use ' or " to select “MPEG”.
2
Press ENTER to display the settings you can select.
AUDIO SETUP
COMPRESSION: ON
MPEG:
PCM
BITSTREAM
BITSTREAM
BITSTREAM
DIGITAL:
3
Use ' or " to select “BITSTREAM” or “PCM”.
BITSTREAM: Use this setting for a digital connection of a
receiver (amplifier) equipped with an MPEG Audio
decoder.
decoder.
PCM:
Use this setting for a digital connection to the
PCM digital input jack of a DAT or MD, or for a
digital connection to a receiver (amplifier) that
does not have an MPEG Audio decoder.
PCM digital input jack of a DAT or MD, or for a
digital connection to a receiver (amplifier) that
does not have an MPEG Audio decoder.
4
Press ENTER to confirm the setting.
5
Press RETURN to exit the SETUP screen and return to normal
screen.
• If you want to go on and specify other settings, use ' or " to
screen.
• If you want to go on and specify other settings, use ' or " to
display the other SETUP screen without pressing RETURN.
When playing a disc recorded using DTS, the bitstream type
signal is output regardless of the setting of “
signal is output regardless of the setting of “
DIGITAL” and
“MPEG”.
DVNC60H(E)#041_047.pm6
19/09/2001, 10:50
47
Click on the first or last page to see other DV-NC55 (serv.man52) service manuals if exist.