Read Sharp XL-S10H User Guide / Operation Manual online
Listening to a CD
1
2
3
3
4
5
Listening to the radio
1
2
FM stereo mode indicator
FM stereo receiving indicator
Press the FUNCTION button until “Cd dISC” appears on the dis-
play.
play.
Press the CD EJECT button to open the CD compartment.
Place a CD on the spindle, label side up.
Close the CD compartment by firmly pushing the corner marked
“PUSH CLOSE”.
“PUSH CLOSE”.
Press the button to start playback from track 1.
Press the FUNCTION button until “FM” or “AM” appears on the
display.
display.
Press the TUNING ( or ) button to tune in to the desired sta-
tion.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable
broadcast station.
tion.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable
broadcast station.
To receive an FM stereo transmission:
Press the FUNCTION button to display the “ST” indicator.
“ ” will appear when an FM broadcast is in stereo.
Press the FUNCTION button to display the “ST” indicator.
“ ” will appear when an FM broadcast is in stereo.
Listening to a cassette tape
1
2
2
4
3
5
Clearing all the memory (reset)
Maintenance
If trouble occurs
A Erase head
B Recording/
Playback head
D Pinch roller
C Capstan
Press the FUNCTION button until “TAPE” appears on the display.
Press the button to open the cassette
compartment.
compartment.
Load a cassette into the cassette compartment
with the side to be played facing toward you.
with the side to be played facing toward you.
Close the cassette compartment.
Press the button to start playback.
When this product is subjected to strong external interference (mechani-
cal shock, excessive static electricity, abnormal supply voltage due to
lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
cal shock, excessive static electricity, abnormal supply voltage due to
lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by re-
setting it.
setting it.
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the MEMORY/SET button and the CLEAR
button, press the ON/STAND-BY button until "CL" appears.
Caution:
Cleaning the tape-handling parts
•
Dirty heads, capstan or pinch roller can cause poor sound and tape
jams. Clean these parts with a cotton swab moistened with commer-
cial head/pinch roller cleaner or isopropyl alcohol.
cial head/pinch roller cleaner or isopropyl alcohol.
•
When cleaning the heads, pinch roller, etc., unplug the unit which con-
tains high voltages.
•
After long use, the deck's heads and capstan may become magne-
Cleaning the CD pickup lens
Do not touch the laser pickup lens. If finger-
prints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.
prints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.
D
A
B
C
Display