Read Sharp XL-HF202PH (serv.man6) Service Manual online
XL-HF202PH/XL-HF302PH
– 2
1. Employing lead-free solder
Example:
Indicates lead-free solder of tin, silver and copper.
2. Using lead-free wire solder
3. Soldering
Lead-free wire solder for servicing
PRECAUTIONS FOR USING LEAD-FREE SOLDER
“MAIN, DISPLAY, KEY/JACK, BLUETOOTH, USB, SMPS PWB” of this model employs lead-free solder.
The LF symbol indicates lead-free solder, and is attached on the PWB and service manuals. The alphabetical
character following LF shows the type of lead-free solder.
The LF symbol indicates lead-free solder, and is attached on the PWB and service manuals. The alphabetical
character following LF shows the type of lead-free solder.
When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional
lead wire solder may cause damage or accident due to cracks. As the melting point of lead-free solder (Sn-Ag-Cu) is
higher than the lead wire solder by 40
lead wire solder may cause damage or accident due to cracks. As the melting point of lead-free solder (Sn-Ag-Cu) is
higher than the lead wire solder by 40
C, we recommend you to use a dedicated soldering bit, if you are not familiar
with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220
o
o
C which is higher than the conventional lead solder
by 40
o
C, and as it has poor solder wet ability, you may be apt to keep the soldering bit in contact with the PWB for
extended period of time. However, since the land may be peeled off or the maximum heat-resistance temperature of
parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corrected. Make sure to turn on and
off the power of the bit as required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after
every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
Be careful when replacing parts with polarity indication on the PWB silk.
parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corrected. Make sure to turn on and
off the power of the bit as required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after
every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
Be careful when replacing parts with polarity indication on the PWB silk.
Ref No.
Description
Parts No.
PWB-A
PWB-B
92LPWB8886MANS
RUiTZ8886AW01
MAIN (A1), DISPLAY (A2), KEY/JACK (A3), BLUETOOTH (A4), USB (A5)
SMPS
[For XL-HF202PH only]
PWB-A
92LPWB8888MANS
MAIN (A1), DISPLAY (A2), KEY/JACK (A3), BLUETOOTH (A4), USB (A5)
[For XL-HF302PH only]
PWB-C
92LPWB8886NFCS
NFC TAG (C)
NFC TAG (C)
[For XL-HF202PH only]
PWB-C
92LPWB8888NFCS
[For XL-HF302PH only]
*NOTE: Please refer to Parts Guide for PWB Service Category
i
Click on the first or last page to see other XL-HF202PH (serv.man6) service manuals if exist.