Read Panasonic TH-50PB2E / TH-65PB2E Other Service Manuals online
故障解析モード
Malfunction Analysis Mode
The electronic pen equips malfunction analysis mode, so can judge whether the electronic
pen is defective or other causes.
pen is defective or other causes.
Power SW • Color LED
SW4
SW5
SW1
SW2
SW3
SW7
SW6
SW8
Yes
No
LED light orange while
pressing the each SW1-8?
pressing the each SW1-8?
Pen is defective
Turn on the Power button (about 2
seconds) while holding down the
Select button(SW2)
seconds) while holding down the
Select button(SW2)
Button Analysis Mode
Press and hold remote draw
button(SW6) until LED lights green.
button(SW6) until LED lights green.
Coordinates Detection Analysis Mode
Yes
No
LED lights green when
point the Pen tip(SW1) on
the Plasma Display?
point the Pen tip(SW1) on
the Plasma Display?
Yes
No
LED lights red when point
the Eraser(SW8) on the
Plasma Display?
the Eraser(SW8) on the
Plasma Display?
Press and hold the
Power button for 2
seconds.
Power button for 2
seconds.
Test competed,
Pen works normally.
Pen works normally.
Change “Button Analysis Mode” and “Coordinates
Detection Analysis Mode” alternately by long
pressing of SW6 (about 1 seconds).
Detection Analysis Mode” alternately by long
pressing of SW6 (about 1 seconds).
Green
Red
Pen is defective
Pen is defective
LED turns off after
lighting orange once
lighting orange once
Click on the first or last page to see other TH-50PB2E / TH-65PB2E service manuals if exist.