AW-PH360L - Panasonic Provideo Service Manual (repair manual). Page 2

- 

- 2 -

 

 

 

 

This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not 
contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.  Products powered 
by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or 
products dealt with in this service information by anyone else could result in serious injury or death.

 

DC +12 V (connector)

Power consumption: 3 A (camera power included),

1.3 A (pan/tilt head only)

Black burst or composite video (BNC connector)

Video: 75 

Ω (BNC connector)

Y:

75 

Ω (BNC connector)

Pr:

75 

Ω (BNC connector) (Switchable to SDI)

Pb:

75 

Ω (BNC connector)

SDI:

BNC connector (Switchable to Pr)

Pan/tilt head control: RS-422 (RJ-45, modular jack)

Pan/tilt head control: RS-422 (RJ-45, modular jack)

Camera control: Interactive serial communication (BNC connector)

Camera / Pan/tilt head control: RS-422 (RJ-45, modular jack)

Camera / Pan/tilt head control: RS-485 (RJ-45, modular jack)

Camera / Pan/tilt head control: RS-232C (28 pin, half pitch connector)

Control signals (connector)

Control signals (connector)

500 m (with BBC No.PSF1/2M, BELDEN 8281 coaxial cable, 10BASE-T straight

cable equivalent to UTP category 5)

1000 m (with BBC No.PSF1/2M, BELDEN 8281 coaxial cable, 10BASE-T straight

cable equivalent to UTP category 5)

When the SDI signal is transmitted: 

200 m with BBC No.PSF1/2M, BELDEN 8281 coaxial cable

indicates safety information.

Maximum load capacity: 4 kg

–10˚C to +45˚C

Max. 90%

Dimensions (W x H x D): 130 x 244 x 192 mm

Approx. 3.5 kg

AV ivory paint (colour resembling Munsell 7.9Y 6.8/0.8)