Read Panasonic EH-KA42-V865 / EH-KA22-V865 Service Manual online
PEWT1210E46CE
(Household) Hair Styler
Model No.
EH-KA42
Model No.
EH-KA22
RUSSIA
CIS
CIS
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
4.1. Disassembly Instructions -------------------------------- 4
4.2. Assembly Instructions ------------------------------------ 4
4.2. Assembly Instructions ------------------------------------ 4
5 Wiring Connection Diagram ---------------------------------- 6
6 Schematic Diagram ---------------------------------------------- 7
7 Exploded View and Replacement Parts List ------------ 8
6 Schematic Diagram ---------------------------------------------- 7
7 Exploded View and Replacement Parts List ------------ 8
7.1. Exploded View for : EH-KA42 -------------------------- 8
7.2. Parts List for EH-KA42 ----------------------------------- 9
7.3. Exploded View for : EH-KA22 -------------------------10
7.4. Parts List for EH-KA22 ----------------------------------11
7.2. Parts List for EH-KA42 ----------------------------------- 9
7.3. Exploded View for : EH-KA22 -------------------------10
7.4. Parts List for EH-KA22 ----------------------------------11
2
1 Warning
Caution:
- Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70
F (30 - 40C) a higher.
Please use soldering iron with temperature control and adjust it to 750 ± 20
F. (400 ± 10C).
In case of using high temperature soldering iron, please be careful not to heat too long.
- Pb free solder will tend to splash when heated too high (about 1100
- Pb free solder will tend to splash when heated too high (about 1100
F / 600C).
2 Specifications
Sell Area or Country
Russia
Ukraine
Kazakhstan
865
Number of Model
EH-KA42
EH-KA22
EH-KA22
Power source
AC 220-240V / 50-60Hz
Power consumption
240V
650W
230V
600W
220V
550W
Air volume with attachment
0.43 m
3
/min
Air flow temperature
(in case of room temperature 30
(in case of room temperature 30
C)
120
C
Cord length
B2 Plug : 1.7 m.
Weight
Roller Brush
320 g
Nozzle
290 g
Blow Brush
310 g
Slim Roller Brush
300 g
3
3 Troubleshooting Guide
Refer to WIRING CONNECTION DIAGRAM.
4
4 Disassembly and Assem-
bly Instructions
4.1.
Disassembly Instructions
1. Remove the two Torx screws from the Escutcheon, then
remove Escutcheon, the Filter and the Fixing ring.
2. Separate the Housing A and B by unfastening Housing
B at indicated area.
4.2.
Assembly Instructions
1. Assembly Select switch to Heater block by soldering
Lead wires connect to the positions.
2. Assembly Connector cover block to Heater block by sol-
dering Lead wires connect to the positions.
3. Assembly Rectifier ass'y block to Heater block by solder-
ing Lead wires connect to the positions.