Read Panasonic H-X015PP / H-X015E / H-X015GK Service Manual online
19
5 Maintenance
5.1.
Lens Cleaning
5.1.1.
Dust / Dirt on the outer casing part(s)
1. Blow off the dust first, then sweep out the dust from narrower spaces with soft cleaning brush.
2. Wipe up the Outer casing part with the dry fuzz-free cloth.
2. Wipe up the Outer casing part with the dry fuzz-free cloth.
5.1.2.
Dust / Dirt on the Lens Glasses.
Define the location of the dust / dirt first, whether it is outside lens surface or not.
1. When it is outside surface of the lens
When the dust and / or dirt gets on the outer side surface of the Lens glasses, order the following procedures.
a. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not Blow too strongly.)
b. Wipe out the dirt on the lens glass surface with Lens cleaning KIT (VFK1900BK) if necessary.
b. Wipe out the dirt on the lens glass surface with Lens cleaning KIT (VFK1900BK) if necessary.
(Consult the Instruction sheet which is included in the Lens cleaning KIT in details.)
2. When it is inside of the lens
When there is dust / dirt inside surface of the 3RD LENS FRAME UNIT, remove it by referring to the following procedures.
1. When removing the 3RD LENS FRAME UNIT, it has to be proceed inside of satisfied clean level.
(Less than class 10,000 (Federal Standard 209D))
As for clean box, refer to the "3.2. Clean Box", in details.
As for clean box, refer to the "3.2. Clean Box", in details.
2. When tightening the screws, use torque driver (RFKZ0456) with specified torque.
3. To keep the Lens performance, use the original the 3RD LENS FRAME UNIT only.
3. To keep the Lens performance, use the original the 3RD LENS FRAME UNIT only.
So the 3RD LENS FRAME UNIT is not supplied as repair part.
Also do not exchange the 3RD LENS FRAME UNIT taken from others.
Also do not exchange the 3RD LENS FRAME UNIT taken from others.