Read Panasonic WV-CW240S / WV-CW244FE Service Manual online
2-2
3. Optical Ass'y Replacement
Procedure
8
Disassembly the Camera while referring to the item
2. Disassembly Procedure for Adjustment.
2. Disassembly Procedure for Adjustment.
8
Referring to Fig. 3-1, disconnect the connector CN4 on
the Sensor Board and remove the Flexible Cable.
the Sensor Board and remove the Flexible Cable.
8
Remove two screws that secure the CCD Bottom Cover
and remove the CCD Unit from the CCD Bottom Cover
and Panning Bracket Ass'y.
and remove the CCD Unit from the CCD Bottom Cover
and Panning Bracket Ass'y.
Fig. 3-1
8
Referring to Fig. 3-2, remove two screws that secure the
Sensor Board and remove the Sensor Board from the
CCD Unit.
Sensor Board and remove the Sensor Board from the
CCD Unit.
Fig. 3-2
8
Remove the Optical Ass'y (IC1) from the Sensor Board.
CCD Unit
Sensor Board
CCD Bottom Cover
Panning Bracket Ass'y
Remove two screws.
(to Camera Unit)
CCD Unit
Optical Ass'y (IC1)
Remove two screws.
Sensor Board
CCD Cushion
Flexible Cable
4. Connection and Setting Up for
Adjustment
4.1. Connection
8
The Fig. 4-1 shows the connection diagram for the
Adjustment Procedure.
Adjustment Procedure.
Test Chart
Lens
Floppy Disk
Vectorscope
Underscanned
Colour Video
Monitor
Colour Video
Monitor
12 V DC or 24 V AC
Power Supply Unit
Power Supply Unit
E.V.R.
Adjustment
Kit
Cable for
E.V.R.
Adjustment
kit
12 V DC
Power Supply Unit
Power Supply Unit
Printer
Connector
Connector
Personal
Computer
Computer
75
Ω
for WV-CW244FE
220-240V AC
for WV-CW240S
CAMERA
Fig. 4-1
8
Connect the probe of the Digital Voltmeter, Oscilloscope
or Frequency Counter at the desired Test Point in each
adjustment step.
or Frequency Counter at the desired Test Point in each
adjustment step.
4.2. Setting Up for E.V.R. Adjustment Kit
(1). Connecting for E.V.R. Adjustment Kit
8
Referring to Fig. 4-1, connect the E.V.R. Adjustment Kit
to CN2 on the Sensor Board of the Camera using the
Cable for E. V. R. Adjustment Kit.
to CN2 on the Sensor Board of the Camera using the
Cable for E. V. R. Adjustment Kit.
8
Connect the connector of the E.V.R. Adjustment Kit to
Personal Computer (IBM PC/AT type) using the printer
connector.
Personal Computer (IBM PC/AT type) using the printer
connector.
8
Insert original floppy disk of E.V.R. Adjustment Kit to the
computer.
computer.
(2). Installing E.V.R. Adjustment Program
8
Make a copy of following necessary files to your comput-
er from original floppy disk of the E.V.R. Adjustment Kit.
er from original floppy disk of the E.V.R. Adjustment Kit.
LADJ.EXE
CW244E.SEQ
CW244E.EVR
Click on the first or last page to see other WV-CW240S / WV-CW244FE service manuals if exist.