Read JBL ON STAGEII (serv.man18) EMC - CB Certificate online
- Page 1 of 52 -
www.nemko.com
46974
This Test Report , when bearing the Nemko name and logo is only valid when issued by a Nemko laboratory, or by a laboratory having
special agreement with Nemko.
special agreement with Nemko.
TEST REPORT
IEC 60950-1 and/or EN 60950-1, First Edition
Information technology equipment – Safety –
Part 1: General requirements
Report reference No ......................: 46974
Tested by
(printed name and signature) ..........:
Sotiris Pispas
Approved by
(printed name and signature) ..........:
(printed name and signature) ..........:
David Atkinson
Date of issue ...................................: 07/11/2005
Testing Laboratory Name .............: Nemko USA, Inc.
Phone: (+1) 858 755 5525
Address ...........................................: 11696 Sorrento Valley Rd., Suite F, San Diego, CA 92121 USA
Testing location ...............................: CBTL
CCATL
SMT TMP
Address ...........................................: 11696 Sorrento Valley Rd., Suite F, San Diego, CA 92121 USA
Applicant's Name ..........................: Harman Multimedia
Test specification
Standard...........................................: IEC 60950-1:2001 and/or EN 60950-1:2001, First Edition
Test procedure ................................: CB–scheme
Non-standard test method ...............: Not used
Test Report Form No. ....................: IECEN60950_1B
TRF originator ................................................ : SGS Fimko Ltd
Master TRF .................................................... : dated 2003-03
2002 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE),
Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright
owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader’s
interpretation of the reproduced material due to its placement and context.
owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader’s
interpretation of the reproduced material due to its placement and context.
Test item description ....................: Computer Speaker system
Trademark .......................................:
Trademark .......................................:
Manufacturer ...................................: Harman Multimedia
Model and/or type reference ...........: on stage and on stage II
Serial number ..................................: Test sample without serial number
Rating(s)...........................................: 1 A, 18 VDC
Model and/or type reference ...........: on stage and on stage II
Serial number ..................................: Test sample without serial number
Rating(s)...........................................: 1 A, 18 VDC
N-TRF Rev 2005-04
- Page 2 of 52 -
www.nemko.com
Report No. 46974
TRF No.:IECEN60950_1B
Name and address of production-sites (Factories):
Harman (Suzhou) Electronics Co, LTD.
3, Jinshan Road,
Suzhou New District
Jiangsu Province
215011, China
Harman (Suzhou) Electronics Co, LTD.
3, Jinshan Road,
Suzhou New District
Jiangsu Province
215011, China
Dai Hwa Industrial
(Great Tone Electric factory)
Datang Management Zone, Dalingsan Town
Dongguan City, Guangdong Province
P.R. China
Copy of marking plate:
- Page 3 of 52 -
www.nemko.com
Report No. 46974
TRF No.:IECEN60950_1B
Tested according to national requirements for the following countries:
All CENELEC members as listed in EN 60950-1:2001 + A11:2004.
All CB members as listed in CB Bulletin 107A, May 2004.
At the time of issuing this report only limited countries are listed for IEC 60950-1:2001, in addition country
deviations for IEC 60950 3
All CB members as listed in CB Bulletin 107A, May 2004.
At the time of issuing this report only limited countries are listed for IEC 60950-1:2001, in addition country
deviations for IEC 60950 3
rd
ed., are included.
List from IEC 60950-1:
Countries listed in CB Bulletin No. 107A, dated May
2004 as follows: Argentina (AR), Austria (AT),
Australia (AU), Belgium (BE), Canada (CA),
Switzerland (CH), Germany (DE), Denmark (DK),
Finland (FI), France (FR), United Kingdom (GB),
Greece (GR), Hungary (HU), Israel (IL), India (IN),
Italy (IT), Korea (KR), Malaysia (MY), Netherlands
(NL), Norway (NO), Poland (PL), Sweden (SE),
Singapore (SG), Slovenia (SI), United States (US).
All country deviations listed in the CB Bulletin are
covered by the Common Modifications, Special
National Conditions, National Deviations, and
National Requirements noted above except for the
following countries which are documented in
Country Deviation Appendixes attached to this
report:
Australia (including New Zealand): CB Bulletin No.
107A, dated May 2004.
Canada: CB Bulletin No. 107A, dated May 2004.
Korea: CB Bulletin No. 107A, dated May 2004.
United States: CB Bulletin No. 107A, dated May
2004.
Countries listed in CB Bulletin No. 107A, dated May
2004 as follows: Argentina (AR), Austria (AT),
Australia (AU), Belgium (BE), Canada (CA),
Switzerland (CH), Germany (DE), Denmark (DK),
Finland (FI), France (FR), United Kingdom (GB),
Greece (GR), Hungary (HU), Israel (IL), India (IN),
Italy (IT), Korea (KR), Malaysia (MY), Netherlands
(NL), Norway (NO), Poland (PL), Sweden (SE),
Singapore (SG), Slovenia (SI), United States (US).
All country deviations listed in the CB Bulletin are
covered by the Common Modifications, Special
National Conditions, National Deviations, and
National Requirements noted above except for the
following countries which are documented in
Country Deviation Appendixes attached to this
report:
Australia (including New Zealand): CB Bulletin No.
107A, dated May 2004.
Canada: CB Bulletin No. 107A, dated May 2004.
Korea: CB Bulletin No. 107A, dated May 2004.
United States: CB Bulletin No. 107A, dated May
2004.
- Page 4 of 52 -
www.nemko.com
Report No. 46974
TRF No.:IECEN60950_1B
Summary of testing:
General
Normal load as described in Annex L or as
close as possible to the most severe
normal use.
Normal load as described in Annex L or as
close as possible to the most severe
normal use.
Normal operation is considered 1/8th of maximum
undistorted power. Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal
operation, 1/8th of the non-clipping amplitude was used with
a filtered pink noise input signal.
undistorted power. Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal
operation, 1/8th of the non-clipping amplitude was used with
a filtered pink noise input signal.
1.5, 2.5. 3.2 External Power Supply
The external power supply was not evaluated as part of this
report. An external power supply approved to IEC 60950
shall be provided. The external power supply output shall be
separately certified as limited power source, complying with
the national regulations of the countries in which the
appliance is to be sold.
report. An external power supply approved to IEC 60950
shall be provided. The external power supply output shall be
separately certified as limited power source, complying with
the national regulations of the countries in which the
appliance is to be sold.
1.7.2 Safety instructions, required markings
regarding use of a specified power supply
regarding use of a specified power supply
Class III Equipment with an enclosure made of HB-Material,
using a non-special connector for the DC input must have a
marking stating the manufacturer and model number of the
power supply to be used. Marking is provided.
using a non-special connector for the DC input must have a
marking stating the manufacturer and model number of the
power supply to be used. Marking is provided.
1.7.12 Language of safety
markings/instruction.
markings/instruction.
Instructions and equipment marking related to safety shall
be applied in a language, which is acceptable in the country
in which the equipment is to be sold.
be applied in a language, which is acceptable in the country
in which the equipment is to be sold.
List of attachments:
1) Country Deviations for Australia (6 pages), Canada (5 pages), China (1 page), Israel (1 page),
Japan (5 pages), Korea (1 page), Singapore (1 page), USA (5 pages).
Japan (5 pages), Korea (1 page), Singapore (1 page), USA (5 pages).