Read JBL HLS 810 (serv.man2) User Guide / Operation Manual online
thank you
for choosing JBL. For more than 50 years, JBL
has been involved in every aspect of music and film recording
and reproduction, from live performances to monitoring the
recordings you play in your home, car or office.
We’re confident that the JBL loudspeakers you have chosen will
provide every note of enjoyment that you expected – and that
when you think about purchasing additional audio equipment for
your home, car or office, you will once again choose JBL.
Please take a moment to complete the enclosed profile card.
It enables us to keep you posted on our latest advancements,
and helps us to better understand our customers and build
products that meet their needs and expectations.
JBL Consumer Products
HLS410, HLS610
HLS615, HLS620
HLS810, HLS820
HLS Center
HLS615, HLS620
HLS810, HLS820
HLS Center
simple setup guide
HLS Series OM 9/11/98 11:50 AM Page 1
one.
Speaker Placement
Proper placement of the
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of the
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of the
loudspeakers. Use these
placement recommendations
as a guide. Slight variations
will not diminish your
listening pleasure.
placement recommendations
as a guide. Slight variations
will not diminish your
listening pleasure.
All of the HLS Series loud-
speakers are video shielded
and can safely be placed
near a television.
speakers are video shielded
and can safely be placed
near a television.
40–60
o
o
HLS615, HLS620, HLS820
As Front Speakers
As Surround Speakers
5–6 ft.
HLS Center
0–2 ft.
HLS410, HLS610, HLS810
The HLS Center is designed
to complement any of the
HLS Series loudspeakers.
It is the ideal way to
re-create the cinematic
experience in your home.
to complement any of the
HLS Series loudspeakers.
It is the ideal way to
re-create the cinematic
experience in your home.
HLS Series OM 9/11/98 11:50 AM Page 2
two.
Speaker Connections
Connection Tips
– +
– +
– +
– +
Speaker Outputs
RIGHT LEFT
RIGHT
LEFT
Speakers and electronics terminals have corresponding (+) and
(–) terminals. It is important to connect both speakers identi-
cally: (+) on the speaker to (+) on the amplifier and (–) on the
speaker to (–) on the amplifier. Wiring “out of phase” results in
thin sound, weak bass and a poor stereo image.
(–) terminals. It is important to connect both speakers identi-
cally: (+) on the speaker to (+) on the amplifier and (–) on the
speaker to (–) on the amplifier. Wiring “out of phase” results in
thin sound, weak bass and a poor stereo image.
– +
– +
– +
– +
Speaker Outputs
RIGHT LEFT
RIGHT
LEFT
HLS610, HLS615, HLS620, HLS810, HLS820, HLS Center
HLS410
HLS Series OM 9/11/98 11:50 AM Page 3
Troubleshooting
If there is no sound from
any of the speakers, check
the following:
any of the speakers, check
the following:
• Receiver/amplifier is on and
a source is playing.
• Review proper operation of
your receiver/amplifier.
a source is playing.
• Review proper operation of
your receiver/amplifier.
If there is no sound coming
from one speaker, check the
following:
from one speaker, check the
following:
• Check the “Balance” control
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are
connected. Make sure none of
the speaker wires are frayed,
cut or punctured.
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are
connected. Make sure none of
the speaker wires are frayed,
cut or punctured.
If the system plays at low
volumes but shuts off as
volume is increased, check
the following:
volumes but shuts off as
volume is increased, check
the following:
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut
or punctured.
• If more than one pair of
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/amplifier.
tions between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut
or punctured.
• If more than one pair of
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/amplifier.
If there is low bass output,
check the following:
check the following:
• Make sure the polarities
(+ and –) of the left and
right “Speaker Inputs” are
connected properly.
(+ and –) of the left and
right “Speaker Inputs” are
connected properly.
If there is no sound from
the center speaker, check
the following:
the center speaker, check
the following:
• Make sure that your receiver’s
Center Channel Mode is in the
”normal“ or ”wide“ position.
If it is in the ”phantom“
position, the center speaker
will not play.
• Check all connections
between processor/amplifier
and the center speaker.
Center Channel Mode is in the
”normal“ or ”wide“ position.
If it is in the ”phantom“
position, the center speaker
will not play.
• Check all connections
between processor/amplifier
and the center speaker.
HLS Series OM 9/11/98 11:50 AM Page 4