Read JBL ENCOUNTER (serv.man4) EMC - CB Certificate online
- Page 4 of 51 -
www.nemko.com
Report No. 27772
TRF No.:IECEN60950_1B
Summary of testing:
1.2.02.01 Normal load as described in
Annex L or as close as possible to the most
severe normal use
Annex L or as close as possible to the most
severe normal use
The ‘Normal load’ was established by adjusting the Satellite
volume and Subwoofer amplitude controls, at the maximum
level, with input connected to a pink noise generator adjusted
to 1/8th Max undistorted output. The input signal used for the
system input, was filtered pink noise as described in IEC/EN
60065 for audio equipment.
volume and Subwoofer amplitude controls, at the maximum
level, with input connected to a pink noise generator adjusted
to 1/8th Max undistorted output. The input signal used for the
system input, was filtered pink noise as described in IEC/EN
60065 for audio equipment.
1.2.05 Connection to the supply.
The external power supply was not evaluated in this test
report. An external power supply suitable for the country of
use shall be provided, and shall have an output complying
with Limited Power Source (LPS).
report. An external power supply suitable for the country of
use shall be provided, and shall have an output complying
with Limited Power Source (LPS).
1.7.12 Language of safety markings /
instruction.
instruction.
Instructions and equipment marking related to safety shall be
applied in a language, which is acceptable in the country in
which the equipment is to be sold.
applied in a language, which is acceptable in the country in
which the equipment is to be sold.
1.7.2 Safety instructions, required
markings regarding use of a specified
power supply.
markings regarding use of a specified
power supply.
Class III Equipment with an enclosure made of HB-Material,
using a non-special connector for the DC input must have a
marking stating the manufacturer and model number of the
power supply to be used. Marking is provi ded.
using a non-special connector for the DC input must have a
marking stating the manufacturer and model number of the
power supply to be used. Marking is provi ded.
3.2 Connection to the supply.
Unit is powered by a limited power source complying with
Sub-clause 2.5. The external power supply was not evaluated
in this test report.
Sub-clause 2.5. The external power supply was not evaluated
in this test report.
List of attachments:
Country deviations: Australia (6 pages), Canada (5 pages), China (1 page), Israel (1 page), Japan (5
pages), Korea (1 page), Singapore (1 page), USA (5 pages).
pages), Korea (1 page), Singapore (1 page), USA (5 pages).
Click on the first or last page to see other ENCOUNTER (serv.man4) service manuals if exist.