Read Harman Kardon DVD 1 (serv.man4) Technical Bulletin online
Harman International SNC
Harman Consumer International 2, route de Tours F-72500 Château du Loir -FRANCE-
Harman Consumer International 2, route de Tours F-72500 Château du Loir -FRANCE-
harman/kardon
Service Information
To:
All harman/kardon Service Centers
Models: DVD1/230V
Subject: Service overview DVD1/230.
Following problems have occurred on the DVD1 since the launch of the product. Below is an overview of the
problems as well as the solutions and the serialnumber cut in the production.
1.
Bad remote control sensitivity. Serialnumber OK > TH0009-04026.
Replace R985 on the rearpanel board, with a new resistor value of 10 kOhm.
Replace R985 on the rearpanel board, with a new resistor value of 10 kOhm.
2.
Open/close problems, Serial number OK will be advised.
Either resolder/exchange ICM-201. In most cases the diode DM202 defective. PN : J2221510304X.
Either resolder/exchange ICM-201. In most cases the diode DM202 defective. PN : J2221510304X.
3.
Digital COAX output problems. Serialnumber OK > TH0009-15860.
Insert 10 Ohm resistor at position R801 on the output board.
Insert 10 Ohm resistor at position R801 on the output board.
4.
RGB autoselect function do not work. Serial number OK > TH0009-14249.
Pin 16 in Scart output needs to be changed accordingly, request service information.
Pin 16 in Scart output needs to be changed accordingly, request service information.
5.
DVD1 remote activates older HK equipment. Due to the codeconflict, some customers will find their older
HK amplifiers to be triggered by the remote from the DVD1.
HK amplifiers to be triggered by the remote from the DVD1.
6. DVD1
does
not playback CDRs.
7.
Locked in St. by. Could be related to defective D05 in the power supply. Serialnumber OK TH0009-14827.
8.
Locked in St. by, could be related to the software loaded in to the MPEG (mainboard).
Service kit for update will be available.
Service kit for update will be available.
9.
16:9 and 4:3 control signals in the scartoutput, not working properly. Serialnumber OK > TH0009-15860.
Remedy short R840, Change R841 to 500 Ohm, Change R845 and R838 to 1 kOhm.
Remedy short R840, Change R841 to 500 Ohm, Change R845 and R838 to 1 kOhm.
10.
Occasionally the power button stucks. Serialnumber OK > TH0009-15860.
The power button is slightly blocked by the frontpanel (glasswindow).
11.
Problem is related to the coincidence of the internal heat and the some production problems in specific
laser productions. Replacement of the laser PN : 10663610XX can be ordered. Keep the defective ones
for eventually return to HCI.
Production have changed from serial number TH0009-13491, the remedy includes new mecha, 3
resistors and a vented topcover. This kit can be ordered as DVD1REPKIT. Service information can be
obtained from our side.
For all repairs related to the mecha : Keep the defective mechas, collect and inform us the
serialnumbers for the repaired units.
Complete service information with more details for all above issues can be obtained from our side.
laser productions. Replacement of the laser PN : 10663610XX can be ordered. Keep the defective ones
for eventually return to HCI.
Production have changed from serial number TH0009-13491, the remedy includes new mecha, 3
resistors and a vented topcover. This kit can be ordered as DVD1REPKIT. Service information can be
obtained from our side.
For all repairs related to the mecha : Keep the defective mechas, collect and inform us the
serialnumbers for the repaired units.
Complete service information with more details for all above issues can be obtained from our side.
Display