Read Harman Kardon AVR 142 (serv.man2) EMC - CB Certificate online
Reference No. : 54120903C Page 2/60
◀ Anam EMC Test Laboratory ▶
CONTENTS
Page
1. Client Information
4
2. Equipment under test (EUT)
4
2.1. Identification of the EUT
2.2. Additional information about the EUT
2.2. Additional information about the EUT
3. Test specifications
5
3.1. Standard
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
4. Test summary
5
5. Mains terminal disturbance voltage
6
5.1. Operating environment
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
6. Disturbance Radiation
8
6.1. Operating environment
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
7. Antenna Terminal Disturbance Voltage
11
7.1. Operating environment
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
Reference No. : 54120903C Page 3/60
◀ Anam EMC Test Laboratory ▶
8. Disturbance Power
13
8.1. Operating environment
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
9. Harmonics
16
9.1. Operating environment
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
10. Flicker
17
10.1. Operating environment
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
11. Photograph of Product
18
12. Photograph of the test set-up
20
Annex - Measurement data;
Annex A: Mains terminal disturbance voltage (6 Copies)
22
Annex B: Disturbance Power (29Copies)
28
Annex C: Harmonics (3 Copies)
57
Annex D: Voltage fluctuations-flicker (1 Copy)
60